The FreeCAD file contains an object 'dd' (DynamicData), where the parameters may be set inthe property editor.

Section 'User Settings':
- Columns
- Rows
- Height
- Set_screw_holes

Section 'User Settings - Dividers':
- Dividers
- Inner_scoop_radius

Section 'User Settings - Label Tabs':
- Label_full_length

One exported .stl file is enclosed as an example: Gridfinity Divider Storage bin, 3x2 units wide/long, 5 units high, 4 dividers, tab for labels, no screw holes in the magnet pockets in the base.


Bugfix (2023-02-26)
Included label tab height into calculation of minimum height.

Bugfix (2023-05-19)
1-column-problem fixed.

Gridfinity parametric FreeCAD file for Divider Storage along with Divider Storage 3x2x5 (4 dividers)

The FreeCAD file contains an object 'dd' (DynamicData), where the parameters may be set inthe property editor.
Section 'User Settings':
- Columns
- Rows
- Height
- Set_screw_holes
Section 'User Settings - Dividers':
- Dividers
- Inner_scoop_radius
Section 'User Settings - Label Tabs':
- Label_full_length

One exported .stl file is enclosed as an example: Gridfinity Divider Storage bin, 3x2 units wide/long, 5 units high, 4 dividers, tab for labels, no screw holes in the magnet pockets in the base.

In my basement machine shop, I installed a central vacuum cleaner with a Kärcher WD3 P shop vac, a cyclone separator with 30 l barrel and 50mm sewage pipes for distribution.
To attach the Kärcher's suction pipe to the sewage pipes, I needed some socket matching the Kärcher plug at the suction hose. Here it is.

The socket consists of two parts: The socket itself and a lid that closes the opening when the suction hose is not plugged in.
They are printed best top-down and with tree support (Cura) for the socket. They both have a small notch for inserting a small screwdriver for separating the part from the print bed.

Vacuum Socket 50mm for Kärcher

Vacuum Socket 50mm for Kärcher - Socket.stl

Low profile side clamps for the mill, inspired by Quinn Dunki (Blondihacks) and her video <https://www.youtube.com/watch?v=E5pW4PDv6JU>, but adapted to metric measures.
I made them of mild steel S355.

The locking screws are M10x20 grub screws (ISO 4026). It may be necessary to turn the end of these down to 8.5 mm, if the threads in the corresponding holes of the clamp are not tapped completely to the ends. 
The mounting screw is an M8 flat head hex socket screw (DIN 7984). A length of 25 mm matches the T-slots in my mill table perfectly.
You will need M8 T-nuts matching the slots in your mill table.
My mill has 12mm T-slots. Since 12mm/M8 T-nuts are not standard, I made them myself.

Enclosed files are
- .stl for displaying the part on Thangs
- .FCStd is the FreeCAD file
- .step is the part exported in STEP format
- .pdf is a drawing of the part (doesn't show the clearance at the bottom of the two wings)

Low profile side clamp

Low profile side clamps for the mill, inspired by Quinn Dunki and her video <https://www.youtube.com/watch?v=E5pW4PDv6JU>, but adapted to metric measures.
I made them of mild steel S355.

The locking screws are M10x20 grub screws (ISO 4026). It may be necessary to turn the end of these down to 8.5 mm, if the threads in their holes are not tapped completely to the ends. 
The mounting screw is an M8 flat head hex socket screw (DIN 7984). A length of 25 mm matches the T-slots in my mill table perfectly.
You will need M8 T-nuts matching the slots in yout mill table. Since 12mm/M8 T-nuts are not standard, I made them myself.

Zack Freedman's Gridfinity 'Blank Frame' and 'Blank Storage' re-implemented in FreeCAD.

The FreeCAD file contains an object 'dd' (DynamicData), where the parameters may be set in the section 'User Settings' of the property editor (Columns, Rows, Height, Set_screw_holes).
This is a complete rebuild compared to what I uploaded on 2022-06-16, several bugs of the old version fixed.

One exported .stl file is enclosed as an example: Gridfinity blank storage bin, 3x2 units wide/long, 3 units high, no screw holes in the magnet pockets in the base.


2023-02-26
Added variable height infill.

Gridfinity parametric FreeCAD file along with Blank Storage 3x2x3 .stl file

Gridfinity blank storage bin, 3x2 units wide/long, 3 units high, no screw holes in the magnet pockets in the base

Gridfinity-Blank Storage 3x2x3.stl

Gridfinity Blank Block 3x2x3.stl

Gridfinity Lid w. rim 3x2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

gdie

Achievements

Trailblazer

Seedling

Fan Favorite

Gridfinity parametric FreeCAD file for Divider Storage along with Divider Storage 3x2x5 (4 dividers)

Vacuum Socket 50mm for Kärcher

Low profile side clamp

Gridfinity parametric FreeCAD file along with Blank Storage 3x2x3 .stl file