magnetic fidget slider.stl
5 downloads · 1 year ago · Magnetic fidget slider. Requires 9 6mmx2mm magnets per piece. Magnets are print in place and recomme
Magnetic fidget slider. Requires 9 6mmx2mm magnets per piece. Magnets are print in place and recommend flipping the part so the magnet holes print first. Add a pause at layer 14 and resume once all magnets are pressed in. Two pieces are required. Make sure to one with a positive polarity and the other with a negative so they attract.



.png&w=3840&q=75)




.png&w=3840&q=75)
.jpg&w=3840&q=75)








