tracking pixel
Phil R

Magic 8 Ball

by

fhogphil

Follow
Follow
Remix Model
Like
Magic 8 Ball 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
0 Likes3 DownloadsNovember 11, 2021
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4881753.

Update! The cordless version is now available here: https://www.thingiverse.com/thing:4893048

Who doesn’t remember the magic 8 ball? Ask it a yes or no type question, turn it over to see the answer!

Two versions are available. One where magnets keep the two halves together and one that is just pressure fit.

If you use the magnetic version double-triple check the magnet polarity as you push them in. You have one chance to get it right. Do one half at a time. Take a spare magnet and mate it with the one you are about to push in. Mark the outside face of the spare magnet. Keep them together as you press it in. Use that spare magnet for the other two keeping that face out. When done, double check that the spare sticks to all with the marked face up. That face will now go down in the other half.

The “8” portion is a pressure fit. Should not need any glue. Might need small amount of convincing to get in place.

The screen and Nano both pressure fit into place in the bottom. Screw holes for an M2 bolt of 5-8MM are available and you shouldn’t need more than one. You can chose to glue.

All parts are listed below. You will need some jumper wires and/or soldering skills. The screen needs to either have right angle header pins or be soldered. Normal header pins will interfere with the fit. You will also need a micro USB data cable to program and power the nano.

I am not going to go into an Arduino or coding lesson here. https://www.arduino.cc/ has plenty of that available.

Put a watch on this thing as I plan to tweak the sketch some to make the display more interesting.

As always - please hit like above.

5 Pieces 0.96 Inch OLED Module 12864 128x64 SSD1306 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI (White) by Chanketch Learn more: https://www.amazon.com/dp/B08LYL7QFQ/ref=cm_sw_em_r_mt_dp_0JAK1WMK25DHMCT2DG7R?_encoding=UTF8&psc=1

Arduino Nano 33 BLE [ABX00030] by Arduino Learn more: https://www.amazon.com/dp/B07WV59YTZ/ref=cm_sw_em_r_mt_dp_3FZGS8AF0NVJMB469J3Y?_encoding=UTF8&psc=1

=========== or. ===========

Arduino Nano 33 BLE with Headers [ABX00034] by Arduino Learn more: https://www.amazon.com/dp/B07WXKWNQF/ref=cm_sw_em_r_mt_dp_79YQCE5D0Y090NFVS3JH

Round Refrigerator Magnets, 100PCS 6×3MM Small Cylinder Fridge Magnets, Office Magnets, Whiteboard Magnets, Durable Mini Magnets by GBYMIUY Learn more: https://www.amazon.com/dp/B07873ZCY4/ref=cm_sw_em_r_mt_dp_AM3FVMFF3WC0143B1CZB?_encoding=UTF8&psc=1


0 Likes3 DownloadsNovember 11, 2021




This model is restricted by licensing terms. 
0 Likes3 DownloadsNovember 11, 2021
This model is restricted by licensing terms.