AMS is needed for this print. As of 11/2025 no print in parts is available.

Designed for articulations to work right off of print plate. You will need supports for the crown to print properly. However, the supports are printed on to the 3MF file and all settings should be ready to go when you open the file. I've also included a screenshot of the support settings used in Bambu Studio.

I originally designed this file with 6+ colors. However, both a 4 color and 6 color version is included with purchase. See pictures for more details.

I don’t suggest going smaller than 40% or articulations may not work properly. However, you should be able to increase the size as needed.

Keychain version is available in the 3MF file included.

The 3MF file is saved with the settings I used to print the file. Please double-check that these settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.

This design (like all elllim3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.

If you would like to sell the prints you made from my files, please contact me.

The Digital files are never to be re-sold, shared, or given away!

Files Included: Multi Colored Prepainted .3MF Single color .STL

The designs are hand painted in the Bambu slicer, so if you'd like to change any colors, I recommend that you do it when your slicer prompts you to choose the AMS colors.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 3.