AMS is needed for this print. As of 11/2025 no print in parts is available.

Most models are designed to not need supports. However, the manger and two of the wisemen will need supports in order to print properly. The 3mf files have the painted supports and all the setting saved so you should be able to open the file and print. I've also included a screen shot of the support settings used in Bambu Studio when testing.

I originally designed a lot of these files with 6+ colors. However, both a 4 color and 6 color versions are included with purchase. See pictures for more details.

I don’t suggest going smaller than 40% on any of the models or articulations may not work properly. However, you should be able to increase the size as needed.

Keychain version is available in all the 3MF files included.

The 3MF file is saved with the settings I used to print the file. Please double-check that these settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.

This design (like all elllim3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.

If you would like to sell the prints you made from my files, please contact me.

The Digital files are never to be re-sold, shared, or given away!

Files Included: 11 Multi Colored Prepainted .3MF files 11 Single color .STL files

The designs are hand painted in the Bambu slicer, so if you'd like to change any colors, I recommend that you do it when your slicer prompts you to choose the AMS colors.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 3.