Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4526916.

I made this, because the original was not flat enough and wouldnt let me print it without supports.
You can probably print this in PLA.
Just lay the stl on its front (bee-pattern on the bottom) to print without supports.


Flattened/ polished JBL Charge 3 Covermix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4165042.

English Version below.

German Version:
Dies ist ein Warentrenner, wie ihn jeder richtige Deutsche haben muss!
Nur echt mit Bekenntniss zur Kartoffel!
Ich wollte niemandem dieses wunderbare Design vorenthalten.

Version 1 ist nur der Warentrenner zum selber drucken - innen hohl, um Material zu sparen.
Version 2 mit Aussparungen für zwei 3mm LEDs und Platz für Elektronik / Batterien.
Version 3 mit Aussparungen für LEDs und USB-Ports für die Powerbanks. Diese Version werden wir mit der Elektronik und den Powerbanks selber auch als Bausatz anbieten - bald *TM*

.STEP files (Fusion360) sind auch dabei, damit ihr euren eigenen Namen und oder Adresse auf der Unterseite hinzufügen könnt und der Warentrenner zu euch zurückfinden kann, falls ihr ihn mal vergessen solltet.

English:
This is a shopping item seperator. Just the way, any real german would want it!
Feel like a real german with this stylish "Warentrenner"!

Version 1 is the raw shopping item seperator - hollow form.
Version 2 with holes for two 3mm LEDs and space for electronics and batteries.
Version 3 with holes for the LEDs and USB-Ports for the powerbanks. We will be releasing this version as an assembly set with electronics and fitting powerbanks - soon *TM*

.STEP files (Fusion360) also included, for you to add your name and or address to the bottom side, for, if you lose it, to find its way back to you!

EDIT: 
The present is completed and handed over, fully working with alarm signal LEDs and flashlight function using only one switch.
We went overboard with reducing the powerconsumption of the ATTiny, as its in deep sleep, when idle and idle, when its powering the LEDs - which reduces the power drawn to a minimum. (10 micro ampere in idle)
Message me, if you want the code for the ATTiny we used.

Warentrenner / Wares / Shopping Item Seperator

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4890950.

This is a work in progress build of my redesign of the SFF Case Cube 1.0.

The original design was made by @Gunnthorian. 

I hope this design fixes all downsides of the version 1.0.

This case supports:

- 300mm GPU
- SFX PSU
- (M)ITX motherboard
- Standard CPU tower coolers with fans up to 120mm. I used the measurements of the scythe mugen 5.
- 2.5inch SSD and HDDs should definitely fit, 3,5inch could get tricky
- 120mm fan in front (depending on your cpu-cooler setup, you may be able to put a 120mm fan in the back)
- side IO Shield 

Things you will need besides the printed parts:
- All panels are planed as acrylic, but 3mm wood would also work. Therefore you would need a laser cutter or a steady hand for cutting wood ;)
- Screws and Threaded inserts: 
~30(pieces): M3x6mm L x 5mm OD threaded inserts
~30(pieces): M3x10mm screws
- Front IO ( i used this: https://smile.amazon.de/gp/product/B007XCMQHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 , but its not available at amazon right now)
- PSU Cable-Extension C13-C14 or similar ( https://smile.amazon.de/gp/product/B002Y4PT92/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 )

Feel free to comment if you have suggestions. The files will most likely also be hosted on cults3d.

SFF Case Cube 2.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4904248.

this is a custom handle i designed for this nas-case: https://www.thingiverse.com/thing:4190739

feel free to use it :)

Basic Handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4437483.

Customized version of https://www.thingiverse.com/thing:2111353

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2111353

for GEEETECH PLA Spools 1kg

GEEETECH 1kg Hatchbox Spool Drawers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4572428.



Dead Space Marker LED-Base

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

eckhartselektronik

Achievements

Seedling

Explorer