Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4812523.

Ender 3 Pro MeanWell PSU fits perfectly under Y axis extrusion in the back.

You can print 1 or 2 front parts (to be put into central 4040 extrusion), I decided that one is enough for me.

To fix left and right part you will need 4pcs M5 screws (I used ISO7380 M5x10) and 2pcs M4x6 (I used ISO7380 M4x6)
There are 2 versions of the left parts with different power plug fixing screw holes diameter.

UPD 22.05.09 Fixed some minor flaws

UPD 22.10.25 Redid Front piece to be sturdier. 
Added light version which is also easier to install - just twists in. This piece is need to be tested though.

Ender 3 Pro bottom PSU mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5144370.

3DTouch (https://aliexpi.com/EWr7) mount for a Mellow BMG Wind extruder ( https://aliexpi.com/twlM )
Both normal and volcano compatable, for volcano mount your BLTouch from the bottom and from the top for normal E3DV6 (see photos)

To attach it to your extruder you will need 2 M2.5x8 screws
To attach 3DTouch to it you will need 2 M3x10 screws and 2 nuts
There is a version to use with heated insert nuts

Offsets for the setup are 0mm along one axis and 26mm along the other (my Ender setup X0 Y-26)

BMG Wind 3DTouch mount E3DV6 and Volcano compatable

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5159266.

Just a replacement lever handle for my STAYER clamps. 

Added a stop to prevent hanle from braking if you squeese handles too tight. Still doesnt prevent  it from braking if you try to clamp something too tight, but bettter than nothing

STAYER Clamp handle lever

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156504.

This is my version of an adjustable Ender 3 Z axis endstop. It also fits any 40mm wide extrusion that suits V wheels.
Screws required 1pcs M3x10 ISO7380 + 2pcs M3x16 ISO7380 + 2pcs M3 hammerhead nuts + 1pcs M3x16+ DIN912
Lever fits tightly into the mount, I recommend filing it to have a smoohter motion
There are 3 versions of the lever - stock is for rivet M3 nut, heat insert version and a solid plastic version for the screw to selftap. All of them are partially require the screw to selftap. Use drill, if you dont want the screw to selftap

Ender 3 Adjustable Z endstop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3908811.

A PTFE Holder (used with pneumatic fitting PC4) with embedded dust filter. Can be fixed with M5x10 DIN7991 bolt to v slot type extrusion. Cover the bolt with provided plug. Put some foam inside and you're good to go!

UPD To screw in the fitting, please use some solvent, or cut a thread beforehand, so the fitting won't break its groove

PTFE Holder + Dust filter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156499.

Bought FullHD webcam from Ali (https://aliexpi.com/auuy)
The housing is huge, but inside I found a very common 24x24x24mm webcam module.
Since those modules are very common among those chinese webcams, I decided to make my own housing for it.
Final dimensions are 35x35x25mm
You can still use its original mount
To assemble you will need 4pcs M3x10 DIN912 screws, they selftap into the plastic bottom.
As soon I find 2.6V LED, I will updathe the model with a version that also houses it.
Remove one of two lids to get a hole for a cable

Common FullHD Webcam Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5380790.

I have an Ender 3 Pro on the right side of the shelve, so it was uncomfortable for me to use the screen in stock setup. I decided to move the screen inside, between leg extrusions.

The parts are to be glued together. Slots are to be glued right from the start, the hanger is to be glued when the screen is on its place. I used cyanoacrylate to do it. 
There are two versions of the hanger - to suit normal and pro version. I have a pro, so I wasn't able to test the normal version.

Ender 3 inside screen case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156517.

Mounting bracket that fits any of Orange Pi Lite / Orange Pi Lite 2 to mount on Ender 3
Inside there is a place designated for a 3A DC/DC converter (https://aliexpi.com/CLjQ), use doublesided tape to attach it
Screws required 4pcs M3x10 DIN912 + 4pcs M3 nuts
Also there is a duct for the lLEDs to be seen. Use drill and somthing transparent to cover the hole, for them to be seen better
UPD 21.12.08 fixed some small dimensional innacurities,  added cable teeth and cable tie hole.

Orange Pi Lite / Lite 2 Ender 3 Mount slim

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4886532.

Just a handle for the tool you can buy here https://aliexpress.ru/item/4000199510441.html
You will need 2 DIN965 M5x8-10 screws and 2 DIN934 nuts

Tile seam reopen tool handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3948144.

This is a replacement part for Ё-Bot 3d printer
Moved optical endstop X flag to left Y carriage to add 14mm to X of printing area.
You will need M5x16 DIN912 with a washer. Print this and a rail spacer 12mm. Replace 20mm rail spacer which aligns the X rail and realign rail using new spacer. Put 20mm spacer between the rail and right Y carriage. Change #define X_MIN_POS in configuration.h in the firmware and reupload it. Done!
BONUS If you print the flag with plastic that is not transparent to UV light, you wont need to cover flag with anything/ I did with black PETG


Это замена стандартной запчасти 3д принтера Ё-Bot
Перенёс флажок оптического концевика Х на левую каретку У чтобы добавить 14мм области движения головы по оси Х. Для крепления необходим М5х16 DIN912 с шайбой. Напечатайте флажок и проставку для рельс 10мм. Замените 20мм проставку, которая выравнивает рельсу оси Х на прилагаемую 12мм. Выравняйте рельсу заново, проставку 20мм установите между рельсой и правой кареткой У. Измените #define X_MIN_POS в файле configuration.h и перезалейте прошивку. Профит!
БОНУС: Если флажок напечатать не пропускающим уф, то можно им пользоваться не покрывая ничем. Я напечатал чёрным ПЕТГ

Optical Endstop Flag X alternative

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156500.

I got tired of cables cought by stock Z axis endstop, so I redesigned it.
Old version has the endstop lever bit to the left, current version haz lever more to the center.
Screws required 1pcs M3x10 ISO7380 + 2pcs M3x16 ISO7380 + 2pcs M3 hammerhead nuts

Ender 3 Z endstop (fits any 2040 extrusion)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4804955.

Parts needed to mount BMG aero ( https://ali.onl/1O9s ) to ЁBot carriage with 2020 X extrusion and upside down X rail mount.
There are two versions of Bottom part - one with an option of attaching stock fan mount and another without such an option. Both of them has holes for melt in M3 nuts to attach BLTouch or similar. Standart sized BLTouch needs to be cut in order to fit in though.
To attach fans sidemounts you will need 4 DIN912 M3x10 screws and 4 M3 nuts
You can mount fans using 16mm long screws (M2.5 if I'm not mistaken) and standart nuts. I used 1 for each fan, you can use two or none.
There is a spacer for a PTFE tube to go directly to the extruder.
Enjoy
UPDATE 03.05.21
Made fan nozzles more direct. Still no supports

Ё Bot BMG Aero mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5144400.



Ender 3 X axis cover (with a belt straightener)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5154049.

I got tired to refix again and again screws that fix BMG Wind ( https://aliexpi.com/twlM ) to Ender 3 carriage. They are totally inaccessible, thus always loose making nossle tip sway.
This model is also not very mounting friendly, but if you fixed it, you can be sure extruder is fixed tight
Used 2pcs M3x8 DIN 7991 (DIN965, flathead) to fix the mount to the carriage and 2pcs M3x6 ISO7380 to fix extruder to the carriage
All fixing holes designed to be tight fit, so use bit of sanding if they are too tight.
On the photo you also can see:
Model fan mount https://www.thingiverse.com/thing:5144384
3DTouch mount https://www.thingiverse.com/thing:5144370

UPD 2022/09/19 Added a right version (Prototype) as per request



BMG Wind Ender 3 Stiff Mount

Extruder Mount (Right).3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

drshats

Achievements

Seedling

Ender 3 Pro bottom PSU mount

BMG Wind 3DTouch mount E3DV6 and Volcano compatable

STAYER Clamp handle lever

Ender 3 Adjustable Z endstop

PTFE Holder + Dust filter

Common FullHD Webcam Case

Ender 3 inside screen case

Orange Pi Lite / Lite 2 Ender 3 Mount slim

Tile seam reopen tool handle

Optical Endstop Flag X alternative

Ender 3 Z endstop (fits any 2040 extrusion)

Ё Bot BMG Aero mount

Ender 3 X axis cover (with a belt straightener)

Common FullHD Webcam Case

Ender 3 inside screen case

Ender 3 Adjustable Z endstop

Ender 3 Z endstop (fits any 2040 extrusion)

Tile seam reopen tool handle

BMG Wind 3DTouch mount E3DV6 and Volcano compatable

Orange Pi Lite / Lite 2 Ender 3 Mount slim

BMG Wind Ender 3 Stiff Mount

STAYER Clamp handle lever

PTFE Holder + Dust filter

Optical Endstop Flag X alternative