This model is restricted by licensing terms.
View license.
This is my first successful HueForge project. remove the .step extension from enbee_thing.hfp.step to import the file into HueForge.
Nozzle size used: 0.4mm Print at 100% infill with a layer height of 0.1mm with a base layer of 0.16mm
Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA Overture Matte Yellow Transmission Distance: 3.6 PLA Overture Purple Transmission Distance: 1 PLA Overture White Transmission Distance: 4.4
Swap Instructions: Start with Black At layer #5 (0.56mm) swap to Yellow At layer #10 (1.06mm) swap to Purple At layer #16 (1.66mm) swap to White for the rest.
3 Likes1 DownloadsFebruary 28, 2024
3 Likes1 DownloadsFebruary 28, 2024
This model is restricted by licensing terms.
View license.