When the Moon Hatched - HueForge Print

For all you bookish nerds (like me!)

A glow in the dark replica cover for When the Moon Hatched <3. The 3MF will have all swaps including the glow in the dark parts. You can follow the instructions below if you do not want to use the 3MF file (or if you don't use Bambu Studio).

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Flashforge Burnt Titanium Transmission Distance: 4
• PLA TECOR Light Blue Transmission Distance: 3.5
• PLA Chrominal Penumbra Gray Transmission Distance: 6.9
• PLA+ Sunlu Coffee Transmission Distance: 1.8
• PLA Kingroon White Transmission Distance: 5.8
• PLA Overture Glow

This print uses 6 unique filaments

Swap Instructions:

• Start with Black
• At 0.48mm swap to Burnt Titanium
• At 0.76mm swap to Light Blue
• At 0.92mm swap to Penumbra Gray
• At 1.08mm swap to Coffee
• At 1.28mm swap to White
• At 1.60mm swap to Glow for the rest [You can ignore this if you don't want the GitD effect!)