I present to you, a stormtrooper that's a little banged up, dosed in some Christmas coloured splatter paint. Of course, if you decide you want something that isn't red and green, let your imagination fly and use other colours as an alternative!

The included 3MF will already have all the settings applied if you're using a Bambu printer or Bambu Studio. If not, pleas use the STL and follow the instructions below.

If you only have one AMS, you can swap out the black once it's done printing for the 5th colour and assign it in your slicer accordingly! This print is 160mm x 240mm - if you wish to resize it, please feel free to do so, but DO NOT alter / alter the Z (height) dimension!

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA CC3D Blue Gray Transmission Distance: 3
• PLA BambuLab Basic BambuLab Green Transmission Distance: 8
• PLA META Sunlu Red Transmission Distance: 4
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At 0.64mm swap to Blue Gray
• At 0.8mm swap to BambuLab Green
• At 1.12mm swap to Red
• At 1.68mm swap to Jade White for the rest.

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!