Root Bound

This is a 160mm x 240mm sized print, completed in approximately 4 hours.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #8 (0.76mm) swap to Dark Gold (dark Brown)
• At layer #11 (1mm) swap to Coffee
• At layer #14 (1.24mm) swap to White for the rest.