Hello friends!

This print was a really fun one - no real colour space restrictions, and I wanted to mess around to see what i could do with contrasting blends. You really can just use whatever colour you want, honestly - I've included the STL so if you have the HueForge program, you plug in your own version of this print and see how the colour mixes work out! If you do indeed do that, please let me know how you go! I'd love to see the results.

The 3MF will have all the colour swapping already loaded in (if you use Bambu Studio or Orca). If you do not want to use my presets/settings, I've also included the STL file for you to do as you wish! I only note that if you want to resize the print, please only resize them on the Z and Y dimensions!

Happy holidays to those of you who celebrate! I don't, not really, so I get to enjoy a few quiet, non-working days to myself.

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.36mm The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.1
• PLA TECOR Purple Transmission Distance: 5
• PLA BambuLab Basic Blue Transmission Distance: 2.9
• PLA TECOR Light Blue Transmission Distance: 5.4
• PLA BambuLab Basic Red Transmission Distance: 5
• PLA CC3D Lemon Yellow Transmission Distance: 6.8
• PLA Kingroon White Transmission Distance: 5.8 This print uses 7 unique filaments

Swap Instructions:

• Start with Black
• At layer #4 (0.44mm) swap to Purple
• At layer #8 (0.76mm) swap to Blue
• At layer #10 (0.92mm) swap to Light Blue
• At layer #13 (1.16mm) swap to Red
• At layer #16 (1.4mm) swap to Lemon Yellow
• At layer #21 (1.8mm) swap to White for the rest.