This was requested by a lovely Patron and since it fit with my Retro Gaming print series, I figured why the hell not! It uses 6 colours so two AMS would be ideal, but you can just swap out two spools if you only have 1 AMS!

The 3MF file has all necessary settings and swaps loaded in. If you do not use Bambu Studio, or want to use your own settings, please download the STL and follow the instructions:

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA CC3D Blue Gray Transmission Distance: 2.8
• PLA Chrominal Chestnut Brown Transmission Distance: 3.5
• PLA Kingroon White Transmission Distance: 5.8
• PLA CC3D Lemon Yellow Transmission Distance: 6.8
• PLA BambuLab Basic Red Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

• Start with Black
• At 0.64mm swap to Blue Gray
• At 1mm swap to Chestnut Brown
• At 1.32mm swap to White
• At 1.48mm swap to Lemon Yellow
• At 1.8mm swap to Red for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.