Panda - Hueforge Wall Mountable Frame Compatible Hueforge Print
This HueForge print was designed in collaboration with TheCraftyMaker, and is 100% compatible with TheCraftyMaker's shadow box frame, sized at 150mm x 210mm.
I have included a 3MF file for Bambu Lab printers and Bambu Studio users, as well as an STL for non-Bambu printers. The 3MF will have everything you need in terms of settings and filament swaps. If you are using the STL, the print instructions are below.
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ eSun Grey Transmission Distance: 1.4
- PLA Overture Light Grey Transmission Distance: 1.6
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #18 (0.88mm) swap to Grey
- At layer #28 (1.28mm) swap to Light Grey
- At layer #36 (1.6mm) swap to White for the rest.
The images for this model are both TheCraftyMaker's and mine, shared to showcase how amazing the prints look in the frame!
If you like my models and would like to support my 3D printing endeavours, I now have a Patreon!
Subscribing to the $10AUD tier will grant you a commercial license to sell the physical prints of any of my models.