Owlbert Einstein - A LanternLore Collab
In collaboration with the wicked cool Lantern Lore, we present to you 'Owlbert Einstein'.
This is a filament painting of LanternLore's photo of an owl, and is a testament to the amazing photography skills involved in being able to capture this marvellous bird.
It's a simple print, 6 filaments (though you could get away with 5 - just don't use the beige and swap to white in it's place. Remember if you're resizing this print, do NOT resize it on the Z dimension!
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA Chrominal Penumbra Gray Transmission Distance: 6.9
- PLA TECOR Beige Transmission Distance: 6.3
- PLA BambuLab Basic Jade White Transmission Distance: 5.8
- PLA CC3D Lemon Yellow Transmission Distance: 6.8
- PLA CC3D Orange Transmission Distance: 6.5 This print uses 6 unique filaments
Swap Instructions:
- Start with Black
- At 0.44mm swap to Penumbra Gray
- At 0.64mm swap to Beige
- At 1.04mm swap to Jade White
- At 1.40mm swap to Lemon Yellow
- At 1.68mm swap to Orange for the rest.
Keep your eyes peeled for more of this cyanidesugar x LanternLore collaboration, we're planning on releasing more filament paintings of his photos!