More Koi - HueForge Print

Y'all liked the last Koi filament painting I did, so I tripled it!

Bambu Studio users can use the 3MF with all the filament swaps already loaded in. For those of you who don't, or want to set up your own filament swaps and settings, please follow the instructions below!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Kingroon White Transmission Distance: 8
• PLA BambuLab Tough Vermilion Red Transmission Distance: 3
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #19 (0.92mm) swap to White
• At layer #37 (1.64mm) swap to Vermilion Red
• At layer #44 (1.92mm) swap to Jade White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!