So if you've been paying attention to my socials, you'll pick up that I'm currently obsessed with the book 'When the Moon Hatched' by Sarah A Parker. This piece is inspired by that book.
I put this up on Etsy a few days ago, and got a bunch of sales immediately - so for those of you who have shops, this could be a good one for you! Tag it as 'inspired by When the Moon Hatched' lol!
I've provided a 0.04mm version (zipped file attached) and a 0.08mm version (this model), the first takes about 7 hours the second takes about 3.5, with no real differences that I could see!
The 3MF files will have all necessary settings and swaps included. If you do not use the 3MF, please follow the instructions below (for 0.08mm height). If you're using the 0.04mm model, the instructions are in the zip folder :)
Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.6mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA Chrominal Chestnut Brown Transmission Distance: 3.5
- PLA+ Sunlu Coffee Transmission Distance: 1.8
- PLA TECOR Beige Transmission Distance: 6.3
- PLA Kingroon White Transmission Distance: 5.8 This print uses 5 unique filaments
Swap Instructions:
- Start with Black
- At layer #8 (0.76mm) swap to Chestnut Brown
- At layer #13 (1.16mm) swap to Coffee
- At layer #18 (1.56mm) swap to Beige
- At layer #22 (1.88mm) swap to White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.