Minimalist R2D2 - Hueforge Print

Amazing minimalist art by Travis Green!

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 155.26x240mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 1.6mm

Filaments Used:

• PLA+ Overture Dark Blue Transmission Distance: 4
• PLA CC3D Blue Gray Transmission Distance: 2.8
• PLA TECOR Light Blue Transmission Distance: 3.5
• PLA Kingroon White Transmission Distance: 5.8
• PLA BambuLab Matte Dark Red Transmission Distance: 1.5 This print uses 5 unique filaments

Swap Instructions:

• Start with Dark Blue
• At layer #7 (0.68mm) swap to Blue Gray
• At layer #8 (0.76mm) swap to Light Blue
• At layer #10 (0.92mm) swap to White
• At layer #14 (1.24mm) swap to Dark Red for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.