Lovely and quick Superman Hueforge Print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: - PLA+ Overture Dark Blue Transmission Distance: 1.8 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA META Sunlu Red Transmission Distance: 4 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Default White Transmission Distance: 5

Swap Instructions: - Start with Dark Blue - At layer #12 (1.04mm) swap to Teal - At layer #14 (1.2mm) swap to Red - At layer #20 (1.68mm) swap to Beige - At layer #23 (1.92mm) swap to White for the rest.