Utilising HueForge's 'Colour Pop' setting, this Koi print really stands out - the colours separated beautifully and blended individually within it's own colour profiles. It's a bit of a long print, and it's a lot of white - but I think it's absolutely worth it!
The 3MF will have everything loaded in including the filament swaps for Bambu Studio. If you're not using Bambu Studio, download the STL and use the following instructions:
Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8
- PLA BambuLab Tough Vermilion Red Transmission Distance: 3
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
- Start with Dark Blue
- At layer #6 (0.4mm) swap to Teal
- At layer #15 (0.76mm) swap to White
- At layer #36 (1.6mm) swap to Vermilion Red
- At layer #41 (1.8mm) swap to Lemon Yellow -At layer #45 (1.96mm) swap to Jade White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!