Ifrit is one of the more popular demons in popular culture, a djinn from the underworld usually bathed in fire and taking the form of a wolf-like beast.
Ifrit is also one of the staples in the Final Fantasy franchise and a delight to convert into a HueForge print. Super simple print for this one, and you can probably use your own combination of the red/orange/yellow hues and it will still look great.
The 3MF will have the swaps loaded for Bambu Studio users. I've also provided the STL for those of you who want to use your own settings. If you scale this print, please only scale the X and Y dimensions and NOT the Z dimension.
Happy Printing!
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 134.51x240mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
- PLA Default White Transmission Distance: 5
- PLA Kingroon Black Transmission Distance: 0.1
- PLA BambuLab Tough Vermilion Red Transmission Distance: 3
- PLA CC3D Orange Transmission Distance: 6.5
- PLA CC3D Lemon Yellow Transmission Distance: 6.8
- PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 6 unique filaments
Swap Instructions:
- Start with White
- At layer #16 (0.8mm) swap to Black
- At layer #25 (1.16mm) swap to Vermilion Red
- At layer #32 (1.44mm) swap to Orange
- At layer #35 (1.56mm) swap to Lemon Yellow
- At layer #38 (1.68mm) swap to Jade White for the rest.