cyanidesugar

Firefox - HueForge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 2
Firefox - HueForge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 2
Firefox - HueForge Print 3d model
2D
3D
Makes
Firefox - HueForge Print 3d model
Firefox - HueForge Print 3d model
This model is restricted by licensing terms. 

A fiery fox for your HueForge print needs! Using HueForge's metallic Brightness Comp to experiment with, I think I've managed to achieve a rather natural looking fire effect around the fox.

The 3MF will have settings already preloaded for you if you're using Bambu Studio/Bambu printers. Otherwise, use the STL with the instructions below!

** Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm**

** Filaments Used:**

  • PLA BambuLab Matte Charcoal Transmission Distance: 0.6
  • PLA CC3D Orange Transmission Distance: 7.4
  • PLA CC3D Lemon Yellow Transmission Distance: 8
  • PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

  • Start with Charcoal
  • At layer #7 (0.44mm) swap to Orange
  • At layer #21 (1mm) swap to Lemon Yellow
  • At layer #37 (1.64mm) swap to Jade White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!



22 Likes43 DownloadsFebruary 7, 2024


22 Likes43 DownloadsFebruary 7, 2024
This model is restricted by licensing terms.