tracking pixel
cyanidesugar

Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
Image 1 of 4
Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid 3d model
2D
3D
Makes
Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid 3d model
Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid 3d model
Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid 3d model
Drunk in Space - Wall Mountable Frame Compatible HueForge Hybrid 3d model
This model is restricted by licensing terms. 
38 Likes55 DownloadsNovember 26, 2023
This model is restricted by licensing terms. 


This model is another HueForge hybrid, combining the 3D model of the astronaut with the HueForge filament painting of Saturn. It's an easy print, completely print in place, with no post processing required. And as a plus, it is also compatible with TheCraftyMaker's Wall Mountable Frame!

I used 6 colours for this, but honestly, the whimsical nature of this print means you can use any combination and any amount of colours you want! If you are using the 3MF file on a Bambu printer, and the Bambu slicer, all the settings have been applied and you should be able to just print it as is.

If you are using the STL, please use the printing instructions below:

Print Instructions

For the HueForge portion of the print (0mm - 3.04mm):

  • Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
  • I used a layer height modifier for the base black to speed things up a little, but you absolutely do not have to if you don't want to!

For the Drunk Astronaut (3.04mm - 36mm):

  • Print with 8% infill (I used gyroid) at 0.16mm layer height
  • 3 walls, 3 surfaces, 3 bottoms

Filaments Used:

  • PLA Kingroon Black Transmission Distance: 0.4
  • PLA Overture Orange Transmission Distance: 8.4
  • PLA Sunlu Lilac Transmission Distance: 6.6
  • PLA CC3D Lemon Yellow Transmission Distance: 8
  • PLA Kingroon White Transmission Distance: 8
  • PLA Starlight Mercury (for the Astronaut!)

Swap Instructions:

  • Start with Black
  • At 1.56mm swap to Orange
  • At 2mm swap to Lilac
  • At 2.24mm swap to Lemon Yellow
  • At 2.44mm swap to White
  • At 3.04mm swap to Starlight Mercury (for the Astronaut!)

This model utilises the Drunk Astronaut model (licensed under CCA) by MrSirChris, a rather lovely design that printed so well on this hybrid print.


If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!



38 Likes55 DownloadsNovember 26, 2023





This model is restricted by licensing terms. 
38 Likes55 DownloadsNovember 26, 2023
This model is restricted by licensing terms.