Darth Vader Chicano Style - HueForge Print

Darth Vader, but artsy!

You can quite honestly print this in any combination of colours that suits your fancy, and I went with a green-black palette. Feel free to let your imagination run wild with this one!

The included 3MF file will have the colour swaps already loaded for those of you using Bambu printers and Bambu studio.

If you do not use Bambu studio, you can load up the STL and use the instructions below!

If you want to resize this print, please ONLY resize the X and Y dimensions, and not the Z height as that will throw off the layer swaps!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA BambuLab Basic Red Transmission Distance: 5
• PLA BambuLab Basic BambuLab Green Transmission Distance: 8
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #9 (0.84mm) swap to Red
• At layer #12 (1.08mm) swap to BambuLab Green
• At layer #16 (1.4mm) swap to Teal
• At layer #20 (1.72mm) swap to Jade White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!