Caraval - HueForge Print

Another book cover replica! Enjoy! 3MF included for Bambu Studio users, STL available for all other users as per usual!

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Max Depth is 2mm and the Actual Depth is 1.8mm

Filaments Used:

• PLA Kingroon Transmission Distance: 0.4
• PLA Flashforge Burnt Titanium Transmission Distance: 4
• PLA TECOR Light Blue Transmission Distance: 3.5
• PLA BambuLab Tough Vermilion Red Transmission Distance: 3
• PLA eSUn Cool White Transmission Distance: 2.7 This print uses 5 unique filaments

Swap Instructions:

• Start with Black
• At 0.52mm swap to Burnt Titanium
• At 0.88mm swap to Light Blue
• At 1.24mm swap to Vermilion Red
• At 1.6mm swap to Cool White for the rest.

Happy Printing!