This one is inspired by Bride, by Ali Hazelwood.
But it's pretty on it's own to be any generic wall or shelf art! This one is 7 filaments, so an AMS is probably preferable. The skin tone is probably one of the reasons for the extra filaments, but it's a whimsical enough print for you to go crazy with your own combination of colours if you want.
The included 3MF file will have the colour swaps already loaded, but you can also just import the STL to use your own settings! The print instructions are below:
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA CC3D Blue Gray Transmission Distance: 2.8
- PLA BambuLab Basic BambuLab Green Transmission Distance: 2
- PLA Chrominal Chestnut Brown Transmission Distance: 3.5
- PLA BambuLab Matte Dark Red Transmission Distance: 1.5
- PLA PolyTerra Pastel Peach Transmission Distance: 1.7
- PLA Kingroon White Transmission Distance: 5.8 This print uses 7 unique filaments
Swap Instructions:
- Start with Black
- At layer #16 (0.8mm) swap to Blue Gray
- At layer #22 (1.04mm) swap to BambuLab Green
- At layer #25 (1.16mm) swap to Chestnut Brown
- At layer #30 (1.36mm) swap to Dark Red
- At layer #36 (1.6mm) swap to Pastel Peach
- At layer #40 (1.76mm) swap to White for the rest.
Much love to everyone, and thank you again for your continuous support!!