Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard.

This is a remix of the AFA Deburring Tool and Cutter Holder.- HSW by Brad @ FTBT 3D. Not sure how to link remix to printable on thangs so this is the link: https://www.printables.com/model/482785-afa-deburring-tool-cutter-holder-hsw

Deburring Tool Holder for Multiboard

Deburring-Tool-Holder.stl

Multiboard holder for standard Noga­™ tool holder. Dovetail on the back for [MultiConnect connectors](https://www.printables.com/model/716558-multiconnect-general-connector-for-your-board).

Prints with standard Multiboard settings. Will need supports for the ring. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)
 

Deburr Tool Holder for Multiboard

Deburr Tool Holder.stl

This is a push fit connected paint brush holder (or similar shaped item) holder for multiboard.

Brush Holder for Multiboard

Brush Holder for Multiboard.stl

It is designed to be mounted using two small T-bolts and has a capacity of 58 brushes

Multiboard brushes holder painting

support pinceaux.stl

This object is part of Multiboard, an "all in one" 3D printed storage system that combines the best of all other systems into ONE design.

With over 600 parts, Multiboard will give you almost everything you need. I'm talking bolts, honeycomb snaps, pegboard accessories, Gridfinity-style boxes, strong shelves, and much more.

If you want storage that adapts as your projects change, or if you want to blow away anyone who walks into your workshop... 

Then head over to https://multiboard.io to discover everything this system can do.

Have fun!

PS - If you're already a member and have no idea what this specific part is for, then go to https://multiboard.io/resources to learn how every part works.


Honeycomb to Multiboard Snap

Honeycomb to Multiboard Snap.stl

This was heavily inspired by this great design: https://makerworld.com/en/models/216791#profileId-239679

I did this remix because the original uses push fit connectors or front connectors for dual or quad offset snaps (those last two demand supports for printing). This version uses bolt-locked connectors which I think are easier to install than the snaps versions and guarantee a more stable connection than the push fit original version.

It prints without supports in the provided positions.

V2: Added a small recess at the bottom of the holes to make it easier to screw in the bolts.

License: https://www.multiboard.io/license

Multiboard - Bolt-locked Spool Holder

Spool Left.stl

The Paint Brush Stand MkII takes the hex design to the next level, creating an enclosed stand to keep your paint brush from falling through/out of the stand. Print the brush holder face down so that supports are not needed.

I would recommend printing with 3 top/bottom layers and 3 walls, with 15% infill of your choice (I like gyroid myself).

The Paint Brush Stand MkII prints in 2 parts. To combine the parts together, line up the ridge along one of the long edges of the insert with the gap along the bottom edge of the stand. Then gently push the top of the insert into the ridge along the top inside edge of the stand.

Paint Brush Stand MkII

Paint Brush Stand MkII.3mf

Use this part to connect a horizontal Multibin Shell to a [Bolt-Locked Bracket](https://link.Multiboard.io/bolt-locked-brackets). You will also need a [Locking Bolt To Small Thread](https://than.gs/m/1323138).

"Rail Pop-Ins" securely attach to the Rail Slots of Multibins by unfolding and "popping" into place. Unlike a Rail, Pop-Ins will not slide off.

This is an "OX" Pop-In, which represents its shape and length (Look at the images to understand).

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Bracket to Bin Joint - 1 LU Bin Fit - OX Fold-In Locked Lite Rail (1 MU Rail)

Bracket to Bin Joint - OX Rail Pop-In.stl

This listing contains a .STL remixing file for ﻿the Multiboard Pegboard Click.

Please upload your remixes to Thangs if you want them to be officially listed in the future. And use the tag “MultiboardRemix” so other people can find them. 

Learn more about remixing at https://www.multiboard.io/parts-library/remixing

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Pegboard Click - STL Multiboard Remixing Files

Pegboard Click.stl

I often use mini Pringles cans as tool holders and part storage, so I wanted a way to mount them to my Multiboard.  The holder should be able to flex just a little bit to get over the lip of the can and hold it securely.  If the cans look a bit too ugly for you as-is, it's pretty easy to hit them with a coat or two of spraypaint and make them look a bit nicer.  I would imagine this would hold a full sized Pringles can fine, and can probably hold any other cylinder the right diameter with enough lip to catch it.

No supports necessary, just print it flat on the bed.

Remix of Pegboard Click - STL Multiboard Remixing Files by Multiboard

Multiboard license can be found here: https://www.multiboard.io/license

Multiboard Pringles Can Holder - Pegboard Click

A small segmented bin for holding pens, pencils, craft knives, glue sticks etc.
Two versions: one with a small side tray (for pencil sharpener, eraser, knife blades or whatever); another version without the tray

No supports needed. Step file included to make of it what you will.

Segmented pencil and small parts holders - Multiboard

Segmented bin v5.step

Ever wished you could pack your gridfinitised workshop for some on-the-go action? Well this is a solution. I wouldn't call it the solution; its grossly overcomplicated, requires post processing, and has not been field tested at all. If you can look past these shortcomings, then enjoy!

The default configuration is 3x5 slots, and you can try different dimensions yourself: https://a360.co/3NkyOrE. The number of parts however, remains the same per "layer" regardless of your chosen dimensions.

Per Layer:

[1] PLATE
[2] CLASP HOOK
[4] CLASP ARM
[6] Axle (3 mm S.Steel Rod) [70 mm length]
in addition to this.

Per Toolbox:

[1] LID
[1] HANDLE
[2] Axle (3 mm S.Steel Rod) [50 mm length]
[2] M4 Threaded Brass Insert
[2] M4 Shoulder Bolt (10 mm Shoulder) (Alternatively a regular 15~20 mm Bolt if that's how you roll)
The files provided are for the default configurations 030504 and 030506

The naming convention is as follows:

## ## ## - ########
## → Width of toolbox [integers] [ 02 < n < 10 ]
      ## → Length of toolbox [integers] [ 03 < n < 10 ]
            ## → Thickness of toolbox layers [integers] [ 03 < n < 06 ]
                     ######## → Part name
Values left as ‘##’ signify that the part works for all variants of this dimension.

Gridfinity Toolbox (Parametric)

Plate.stl

Preview.stl

I needed an 8mm offset connector to join 3 Multiboard tiles at the corner so I made my own.  This is based on the Quad Snap Connectors.  

Printing:
Uses the standard Multiboard print settings
0.2mm Layer Height
0.4mm Nozzle
3 Wall Loops
No Support Needed

To use, you will need to print one Part A for the side facing the wall and one Part B for the side facing away from the wall.

8 mm - Triple Offset Multiboard Snaps Parts A & B

8 mm - Triple Offset Snaps (DS Part A).stl

Welcome to the **MULTIVERSE**!  
Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts!  In 4 sizes for you to explore!

**Files Included:**
**3 Shelf Sizes: 1x2 - 2x3 - 2x4 - 2x5**
Included a T-Bolt, and MultiTool (by Keep Making for convenience)

**Multiboard Printing Guidelines:**
The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. 

This object is part of **Multiboard**, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at [https://multiboard.io](https://multiboard.io)   

Inspired by the gridfinity baseplate from Daboo.


MultiBoard Gridfinity Shelves

MultiBoard_GridfinityShelf_2x3.stl

MultiBoard_GridfinityShelf_2x4.stl

MultiBoard_GridfinityShelf_2x5.stl

Multitool.stl

9 mm Small Thread, Flat Head, T-Bolt.stl

MultiBoard_GridfinityShelf_1x2.stl

**MultiBoard Gridfinity Shelves**
**3x4, 3x5, 2x6, 3x6**
Uses included T-bolt

I recommend using 4-6 walls and 20%+ infil

MultiBoard Gridfinity Shelves 3x4, 3x5, 2x6, 3x6

MultiBoard_GridfinityShelf_3x6.stl

MultiBoard_GridfinityShelf_3x4.stl

For when you want gears AND magnets!

This replaces the "Carriage" elements of Nich Fugal's Gridfinity Carousel (motorized or not.) https://www.printables.com/model/897707-gridfinity-carousel-motorized

This version adds magnets but sacrifices about 3mm of headroom. There are no other differences.

Nich's original design is smooth enough that magnets aren't strictly necessary, but I just like the extra security and feeling bins snap into position.

Fusion source: https://a360.co/48soXfa

Gridfinity was inspired by Alexandre Chappel's ModuBOX system, which is found at https://www.alch.shop/shop/assortment

Gridfinity Carousel Carriage w Magnets

Carriage w Magnets.stl

This bin started off as a 2x4x10U Gridfinity bin modified to hold up to 6 sets of pliers in at ~45 degrees.  Since there was extra room on the front I cut out the profile to make a little bin you could use to hold parts while working.

If you want to save some filament you could slice off at least 10mm from the top.

GF Pliers Holder 2x4.stl

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. 

The Tiles have two types of holes: Multiholes and Pegboard Holes.

The Multiholes (big holes) are 25 mm apart and allow you to insert “Snap” pieces, in a similar way to the “Honeycomb Storage Wall'' system. The Multihole is also a threaded hole, allowing you to screw in Big Thread Bolts.

The Pegboard Holes (small holes) are 25 mm apart and allow you to use hundreds of pegboard accessories with the tiles. The Pegboard Holes are also threaded, allowing you to screw in Small Thread Bolts.

Tiles are also symmetrical on both sides.

This is a “Core” Tile, so it has two sides with pegboard holes, and forms most of your Multiboard.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Video tutorial on how to print stacks: https://www.youtube.com/watch?v=xs2urfM0MRM

This stack print has been designed specifically for 0.2 mm layer heights. They have a 0.2 mm gap between each print. Make sure that all top surfaces get ironed. As a bonus, set the seam alignment to random for maximum strength.

Apart form that, use the default recommended settings: 3 wall perimeters in wall thickness. 15% infill. No supports are needed. The printing orientation is as provided in the file.

Also, keep in mind that one side of the tiles aren’t going to come out as nice as printing individually (in case you want to use them double-sided).

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io


8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Ironing Stack

8x8 Multiboard Core Tile x4 Stack.stl

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

cfcantley

Achievements

Voyager

Novice Maker