A decorative house lamp. You will need to print 20 half plates and 40 hex plates for assembly. Glue was used to apply each half plate and hex plate to the top and base. Each half and hex plate was printed with 0% infill, 8 top layers, and a .2mm layer height. The base and top were printed with 0% infill, with a .2mm layer height. All pieces were printed on a P1S printer. The cord I used for the light bulb was a 10Foot with Wire Electric Light Socket Waterproof Plug Light Outdoor Plug Light E26/E27. You can find them on Amazon.com https://www.amazon.com/Electric-Waterproof-Temporary-Building-Lighting/dp/B0C6F3CC6J?pd_rd_w=rvpC7&content-id=amzn1.sym.7f026574-ac48-4de7-90dc-0f9e21ac74f3&pf_rd_p=7f026574-ac48-4de7-90dc-0f9e21ac74f3&pf_rd_r=A9HR6H2ZRGSDYQ5AT4F3&pd_rd_wg=biqAL&pd_rd_r=9ab26398-63a0-43ed-899c-52a57c183330&pd_rd_i=B0C6F3CC6J&ref_=pd_bap_d_grid_rp_0_1_ec_pd_yo_rr_rp_d_sccl_1_3_i&th=1