“Push your enemies away or pull them toward you - with UNDERTOW, you control where the fight occurs.” - Fink Manufacturing
I've designed a series of tiles representing Vigors from BioShock Infinite - tonics the player consumes to gain a myriad of powers. Each tile is designed to look like the unique Vigor bottles, with their powers captured as game effects.
Rules Card Text On Play: Push or Pull a tile in line of sigh with one of Undertow's edges. Push: Move the target tile away from Undertow until it is blocked by another tile or the edge of the board. Pull: move the target tile next to Undertow.
Printing / Assembly Instructions - Please Read Before Printing I've provided various options to help those who don't have multi material systems, or to minimize filament waste if you do. I also included 3mf files.
Undertow Tile
- MMS: Drag undertow_tile_base and undertow_tile_octo_surface into your slicer together. Assign colors and print.
- No-MMS: Same as above, but pause and swap filaments for the surface details.
Undertow Icon (Print twice if using it in the card - see the card section)
- MMS: Drag undertow_icon_base, undertow_icon_foreground, undertow_icon_octopus into your slicer together. Assign colors and print.
- If you want to minimize filament swaps, print the foreground separately and glue it on.
- No-MMS: Drag undertow_icon_base and undertow_icon_top into your slicer together. Pause and swap filaments for the top section.
- You may also choose to print the icon as a single unit (undertow_icon_single).
- If you want as close to the 3 color variant as possible, you could print the base and octopus with a swap, then print the foreground separately and glue it on.
Glue the Undertow Icon onto the tile.
Undertow Card I've designed this to use the same icon as the tile, but you can absolutely forgo that extra work and just slice the solid stl as you please (undertow_card_full). Otherwise, print a second Icon to use with the card and continue:
- MMS: Drag undertow_card_base and undertow_card_detail into your slicer together. Assign colors and print.
- No-MMS: Same as above, but pause and swap filaments for the surface details.
- Or use the undertow_card_no_icon_one_piece stl and slice as you please.
Glue the Undertow Icon onto the card.