Z-Axis Manual Adjustment Knob (CR10,  Ender 3, HicTop, Tevo Tornado)

CR10_ZKNOB-Z-axis-manual-adjustment-knob_by-Baschz-Leeft.stl

Spatula for Resin Printers

Replacement spatula to clean the vat of my Elegoo Mars resin printer after I lost the one that came with the machine, and it works perfectly.

I printed it in PLA on an FDM machine (Ender 3) with a 0.2mm layer height, three top and bottom layers and a 20% gyroid infill. The next one I will probably give one or two extra top and bottom layers, but so far it has been strong enough since you won't (or shouldn't) put too much pressure on it anyway.

TIP: Set the seam to be on the handle side to avoid possible sharp edges on the scraping side.

Use at your own risk.

Mandalorian | Beskar Steel iPhone X Case

FOR FLEXIBLE FILAMENT ONLY
use Concentric as the initial layer pattern
https://www.youtube.com/watch?v=e-BZM-giOo4

I used the already well-designed Adafruit bumper case as a starting point, as I saw no need in redesigning something good and I wanted to focus on seeing if I could get a nice pattern going.

I first filled in the openings on the original case's backside and then drew a bunch of splines in sort of a Damascus steel pattern. I offset them 0,4 mm and cut them out of the first layer (0,2 mm deep, as that's the resolution I would be printing in), hoping this would leave shapes which would be filled fittingly to the Beskar/Damascus pattern if I used Concentric as the pattern of my first layer. I think it came out quite nice.

Interlocking Business Card Stand & Holder

To display my carded enamel pins I designed a stand which nicely presents them in shops, on markets, etc. They work great well on their own, but can also connect to themselves, so you can create a whole line of them.

You can of course use them for business cards, Pokémon, Magic, or any other cards you might have as well. Postcards, polaroids, you name it!

Speaking of photos; please share yours if you've printed these and use them. I would love to see them. My Instagram and Witter handle is @baschz. Have a nice day!

Wondering about the pin? It's a Kapsalon (Dutch for barbershop); the infamous Rotterdam caloryiebomb, invented by a hairdresser and his neighbouring kebab shop, which is slowly but surely taking over the world. The inedible soft enamel pin version is available in my web shop on http://www.lamballbakra.com.

Printing tip:
PRINT UPSIDE DOWN for best results

Rummikub Tile Holder Tray Replacement Feet

Lost some so I copied the design and printed replacement feet for my 1980's Rummikub tile holder trays. Please help yourself if you miss some too.

Panel Key 8mm Square Female

A quick panel key that I needed for an electricity box in my garden that I gave a bit of a toy look while I was at it.

I made the hole 8.2mm instead of an exact 8mm, to account for a tiny bit of over-extrusion while printing.

LUNDIA Shelving System Connector Base Shape

I recently bought a second hand LUNDIA Original shelving system to create some order in my tiny workspace at home. To use this storage rack to its fullest I've designed a piece that slides into the cut out rail in the wooden uprights and can then be secured with one of the original pins that come with the system.

This piece is a base onto which I (and you) can design whatever I (and you) need to hang in this small new work station. Feel free to use and remix at will, please DO mention where you got it from and SHARE your design, because I would love to see what you will use it for plus that's the license I'm giving it :)

PRINTS BEST UPSIDE DOWN


Artist, designer, maker, curator from Rotterdam, the Netherlands.

baschz.com
lamballbakra.com

baschz

Achievements

Seedling

Debutant

Z-Axis Manual Adjustment Knob (CR10, Ender 3, HicTop, Tevo Tornado)