A handheld tray for transporting Gridfinity holders from location to location. I use mine for moving my nuts and bolts from my garage to my office and back again. 
- Printable on Prusa sized bed (the 5x5 model)
- Printable on smaller Ender3 bed (the 4x5 model)
- The trays are stackable
- Takes up no more than a 6x5 square
- Fusion360 file included

Gridfinity Transport Tray

A handheld tray for transporting Gridfinity holders from location to location. I use mine for moving my nuts and bolts from my garage to my office and back again. 
- Printable on Prusa sized bed
- The trays are stackable
- Takes up no more than a 6x5 square
- Fusion360 file included

Gridfinity Transport Tray - 4x5.stl

Simple 1x1 Gridfinity holder for a [deburring tool off of amazon](https://www.amazon.com/gp/product/B07RM1D6WD)

- The tool hole is 20mm in diameter
- The scraper holes are 3.45mm in diameter and fit the scraper heads snugly.

Also included is the Fusion360 .f3d file.

Gridfinity Deburring Tool Holder

Simple 1x1 Gridfinity holder for a [deburring tool off of amazon](https://www.amazon.com/gp/product/B07RM1D6WD)

- The tool hole is 20mm in diameter
- The scraper holes are 3.45mm in diameter and fit the scraper heads snugly.

Gridfinity holders to fit the [11-piece 3/8" drive Craftsmen deep socket set from Lowes.](https://www.lowes.com/pd/CRAFTSMAN-11-Piece-Metric-3-8-in-Drive-6-point-Deep-Socket-Set/1000600191)

This features:

- SAE (Imperial) version
- Metric version
- Spot on the left side for writing a label
- Stackable
- Chopped to fit Prusa sized bed



Gridfinity Deep Socket Set Holder

Gridfinity Long Socket Holder - Imperial 1st Half.stl

Simple Gridfinity bins with one wall missing. This allows you to slot in larger tools that still need a place. 

I use these for my pneumatic nail guns and staple guns.

Gridfinity Open Ended Holders

Gridfinity Open End Tool Holder 1x5.stl

Gridfinity Open End Tool Holder 4x5 - Regular Height.stl

Gridfinity Open End Tool Holder 3x5 - Regular Height.stl

Gridfinity Open End Tool Holder 2x5 - Regular Height.stl

Gridfinity Open End Tool Holder 1x5 - Regular Height.stl

Gridfinity Open End Tool Holder 5x5 - Regular Height.stl

Gridfinity holder for socket/female side of USB A devices. I use mine to hold USB A to USB C adapters.

Gridfinity USB Retention Holder

For that special SD card in your life, give it the love it deserves.

Gridfinity The One SD Card Holder

Gridfinity holder for my alcohol spray bottle and 2" plastic bed scraper from lowes.

Gridfinity Spray Bottle and Scraper Holder

A Gridfinity adapter is nothing more than the bottom mating portion with a flat top surface. This enables you to fasten whatever you want to a Gridfinity system without needing to 3d model anything specific. 

For example, if you already have a great case for your tool, just glue the tool case to an appropriately sized adapter and bam, now it's a Gridfinity case.

Also included in the download is the Fusion360 .f3d file.

Gridfinity Adapters

Gridfinity Adapter 5x5.stl

Gridfinity holder for the loctite super glue squeeze bottle. Zack's glue stick holder was too small by about a millimeter or two so I made this.

Gridfinity Super Glue Squeeze Bottle Holder

1x2 gridfinity block to store calipers and 2 PCB rulers.

Gridfinity Caliper & PCB Ruler Storage

Prusa sized iterations of Zack Freedman's Gridfinity organizational system.

These are just the frames in different widths and lengths.

atucom

Achievements

Seedling

Fan Favorite

Trailblazer

Gridfinity Transport Tray

Gridfinity Deburring Tool Holder

Gridfinity Deep Socket Set Holder

Gridfinity Open Ended Holders

Gridfinity USB Retention Holder

Gridfinity The One SD Card Holder

Gridfinity Spray Bottle and Scraper Holder

Gridfinity Adapters

Gridfinity Super Glue Squeeze Bottle Holder

Gridfinity Caliper & PCB Ruler Storage

Frame1x2.stl

Frame4x5.stl

Frame1x4.stl

Frame2x2.stl

Frame5x5.stl

Frame2x5.stl

Frame1x5.stl

Frame2x4.stl

Frame2x3.stl

Frame3x4.stl

Frame4x4.stl

Frame1x1.stl

Frame3x5.stl

Frame3x3.stl

Frame1x3.stl