Use Single Border Tiles if you just need an individual Tile with nice borders on all sides. 

Optionally, you can build an entire board using only Single Border Tiles for simplicity (instead of combining Corner, Edge, and Core Tiles). However, if you do, the board will be missing the small thread holes between tiles.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

5x5 MU - MultiBoard Octagon Plate

5x5 Single - Multiboard Border Tile.stl

4x4 MU - MultiBoard Octagon Plate

4x4 Single - Multiboard Border Tile (3).stl

3x3 MU - MultiBoard Octagon Plate

3x3 Single - Multiboard Border Tile.stl

This is the light version of the [Dual Clip](https://than.gs/m/1009275), it's much easier to remove and is used for creating temporary builds.

Dual Clips are a common Multiboard connection piece. They are mostly used to connect Plates or Tiles together, as well as beams, and Bin Dividers.

Lite Dual Clip

Lite Dual Clip.stl

Dual Clips are a common Multiboard connection piece. They are mostly used to connect Plates or Tiles together, as well as beams, and Bin Dividers.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Dual Clip

Dual Clip.stl

3x3 MU - Thin Plain - MultiBoard Plate

3x3 Thin Plate - Bottom Holes.stl

3x3 Thin Plate - Top Holes.stl

3x3 MU - Plain - MultiBoard Plate

3x3 - Plain Plate.stl

Multiboard Beams are designed to connect with tiles or plates to form 3D structures. They attach to tiles or plates using [Dual Clips](https://link.Multiboard.io/dual-clips). Beams can also connect to each other using Dual Clips.

The beam ends have holes for filament pieces to be inserted. The filament is used to secure other connected beams and lock the side dual clips into place.

The beam includes small thread holes for added functionality. These thread holes also feature smaller secondary holes, allowing you to remove dual clips with a small Allen key.

This is a 2 MU (50 mm) beam that fits with 3 MU tiles. The additional space is for end caps or corner pieces.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

2 MU - Small Thread - L Multiboard Beam

2 L - Multiboard Beam.stl

"Multibin Inserts" are placed inside of "Multibin Shells" to create a "Multibin". Multibin Inserts give the Shell the functionality to hold/organize specific items. 

This Multibin Insert is simply a Bin. A Label Holder can also be attached to this Insert. 

Multibin Inserts can be secured to the Shell using 10x2 N52 Neodymium Disk Magnets that are held in place with "Bottom Magnet Holders".

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

2x3x1 CU - Bin - Multibin Insert

2x3x1 - Bin - Multibin Insert.stl

Multiboard Beams are designed to connect with tiles or plates to form 3D structures. They attach to tiles or plates using [Dual Clips](https://link.Multiboard.io/dual-clips). Beams can also connect to each other using Dual Clips.

The beam ends have holes for filament pieces to be inserted. The filament is used to secure other connected beams or lock the side dual clips into place.

This part also has small holes that allow you to remove dual clips with a small Allen key.

This is a 4 MU beam, compatible with tiles that are 5MU (125 mm), where 1 MU (Multi Unit) = 25mm.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

4 MU - Mid Hole - I Multiboard Beam

5mu Mid Hole I - Multiboard Beam.stl

Multiboard Beams are designed to connect with tiles or plates to form 3D structures. They attach to tiles or plates using [Dual Clips](https://link.Multiboard.io/dual-clips). Beams can also connect to each other using Dual Clips.

The beam ends have holes for filament pieces to be inserted. The filament is used to secure other connected beams or lock the side dual clips into place.

This part also has small holes that allow you to remove dual clips with a small Allen key.

This is a 3 MU beam, compatible with tiles that are 4MU (100mm), where 1 MU (Multi Unit) = 25mm.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

3 MU - Mid Hole - I Multiboard Beam

4mu Mid Hole I - Multiboard Beam.stl

End Caps attach to the end of Beams. They connect using [Dual Clips](https://link.Multiboard.io/dual-clips).

They also have holes for filament pieces to be inserted, which better holds the beams into place.

It also have holes to help you remove the Dual Clips using a small Allen key.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

L - All Sides - End Cap - Multiboard Beam

End Cap - Multiboard Beam.stl

This is for making a Single Corner by connecting three Beams together. It connects using [Dual Clips](https://link.Multiboard.io/dual-clips).

It also has holes for filament pieces to be inserted, which better holds the beams into place.

It also has holes to help you remove the Dual Clips using a small Allen key.

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Single Corner - Multiboard Beam

Corner - Multiboard Beam.stl

Zettlebox

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

andreas.felix.haeberle

Achievements

Novice Maker

Voyager