This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for a micro sd card reader for arduino.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE

CMS_SD_card_reader.stl

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module can hold a small breadboard.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE



CMS_breadboard_module.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033128.

This was one of my first models, I replicated the fusion animation Guillotine from Persona 5, I had to design it because I'm collecting the official manga and I did not find any official ATLUS bookend. I think i did a decent job replicating every detail shown in the animation, there are two main versions, a closed one and an open one and you can either print them for a right endbook or a left one. I'm not the best when it comes to painting and that's why I did everything I could just to avoid painting complex stuff and I think it turned out pretty good, considering I'm still bad at painting you could actually easily get a better result by yourself. It did take me a lot of time to model, print considering various failed attempts, that's why I decided it was worth a little. I decided to create an overly detailed guide in google docs. In the guide I included really everything I could, even my selection of paints and how to paint each part, still, you should check the colors with the animation and check for yourself because you can probably do better. I really hope you like this model it fits really well on my bookshelf and came in handy for displaying my mangas. You will find with this item 17 STL files already ready for printing (some are rotated but it's easy to guess the right orientation).
Guide: https://docs.google.com/document/d/1_r_e_2z9lL_7aska07qUBuTD_P6TWbj9HzaBc1feqEI/edit?usp=sharing

https://www.youtube.com/watch?v=OV-WfUXbxMY

Persona 5 bookend

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033145.

I often decide to tidy up my desk and workspace, to do that I sometimes displace buttons as I did for my second DIY monitor and my HDMI switch.

To make it easy and cool looking I decided to make a 3d printed model that uses only a spring and a common 6mm switch (the most common switches you can salvage from pretty much anything) to make a reliable, good-looking keyboard-like switch. The model has a moving piston that is guided that closes the switch located underneath it, the upper part has a stem on which you can mount most cherry MX compatible keycaps you can easily find on Thingiverse, unfortunately, my actual keyboard keycaps do not go on them but making them work would require making the stem way too thin and risking it snapping inside your key which is not the best, anyway I'll gladly tweak it for you if needed.

In addition to that, I've made a trace to keep four of them together, just pass the cable through the hole before soldering the switch and then after securing the wire slide into place the bottom part to keep all in place. I can make a bigger one but it would mean two cables for each switch that are to consider when routing them, anyway I can add custom ones if needed and if you want to make it yourself the vase of the switch is 20*20mm, just make the space for them and add a circular hole in the middle with a 5mm diameter. To make one of them all you need is:

A 7*12.5mm spring
A common 6mm switch
Hot Glue
The assembly is simple and you can watch the gif to understand where to put all your stuff, there are two holes for the wires on the base, one is sideways and the other is on the bottom, just remember to pass the cable into the bottom hole if you're using it (and through the trace for multiple switches) before soldering it, it pretty much snaps into place but between the bottom part and the switch/body I would definitely suggest putting some hot glue to make it sturdier, due to the poor consistency of dimensions it might need it or not, in the worst situation you can ask me to resize it or use a file.

The keycap file is easy to find on thingiverse, i did not include it because it's not mine

https://youtu.be/2g1oI1fovU0

Clicky working keyboard-like electronic momentary switch

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033158.

This is the case for a panel mount switch that can be used with a common 7*7mm switch and a 7*12.5mm spring, it's pretty fast and easy to print, it doesn't require supports in any model, I would like to create a big collection with useful electronic 3d models ready to print. The render shows the order in which the pieces go but it's pretty simple.

It all fits together tight the important thing is to print the body not at 0% infill cause it might crack when fitting the parts together

Depending on how well-tuned your printer is you could have to either glue or file the parts for a better fit, in my case it all fits together pretty well

https://www.youtube.com/watch?v=gUytsfc47ls

Working panel mount momentary switch free 3D print model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033031.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for batteries, there are multiple sizes, to make it customizable I've divided the bottom part from the walls, you will have to place them in the same spot in the slicer and change the z for the walls to fit your needs.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video I've made here: https://youtu.be/NnioOohQsZE

CMS battery module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033036.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for DC-DC lm2596 step-down boards.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video I've made here: https://youtu.be/NnioOohQsZE

CMS DC-DC lm2596 step down module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033073.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for an RTC module for arduino.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE




CMS RTC module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033027.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for ESP8266 boards

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE

CMS ESP8266 module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6030493.

This is my attempt at making a standardized system for mounting common modules to your projects. 
It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.
The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, i've included the model) or m3 screws and brass inserts.
In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE

Circuit management system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033078.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for ULN2003 boards for stepper motors such as 28BYJ-48.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video I've made here: https://youtu.be/NnioOohQsZE



CMS ULN 2003 board for stepper motors module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033065.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for relay modules  for arduino

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE



CMS relay holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033042.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for SSD1306 96'' OLED display boards.

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video I've made here: https://youtu.be/NnioOohQsZE

CMS SSD1306 0,96'' oled display module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6033018.

This is my attempt at making a standardized system for mounting common modules to your projects.

It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.

The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.

This specific module is meant for 4 digit 7 segment displays for Arduino

In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.

You can find the template, the screws or other modules here: https://www.thingiverse.com/agasa_workshop/collections/38375766/things

All the details are in a video i've made here: https://youtu.be/NnioOohQsZE

CMS 7 segment display module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4912205.

This is a spool holder with a weight sensor included, it is based on a 2kg load, an HX711 board, and an Arduino nano, I made it basing on my CR10 v2 by creality but it can easily be fitted to other printers it will require:

⚫2 M5 screws
⚫6 M4 screws and 4 nuts
⚫The spool holding tube that comes with the 3d printer, if you don’t have it it’s a tube with a 3cm diameter you can easily print that but if needed I’ll make the model just ask for it.
⚫Load cell (it can have multiple values but I suggest going for the 2kg ones)
⚫HX711 board
⚫4 Digit seven segments digital display with TM1637 (that only has 4 pins, the dimensions are the ones in the link i add)
⚫Arduino Nano and USB cable to program it.
⚫Basic soldering skills
⚫Wires both with and without pins for arduino
⚫Optional: Step down converter 24/12V to 5V depending on the voltage of your 3d printer power supply, if you don’t use it get a wall adaptor and a severed usb cable
⚫Hot Glue gun (you can probably find an alternative tho)
⚫kitchen scale
⚫Optional: Either a empty spool or a full one (or just know the weight of a spool)

I think this can be a pretty cool Arduino project and it's pretty simple i found it pretty amusing i suggest understanding how it works too if you wanna get into this kind of stuff. 

I've also made a pdf guide on how to assemble it and the ino file for the arduino script other than the 7 stl files. The total cost is pretty low if you go with Chinese websites for electronics but it's not that bad even with amazon even tho prices are high for electronics there. Note that the reading is acceptable only while not printing because of the tension of the filament.

Arduino based spool holder with weight sensor free 3D print model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5635044.

I made a replica of the pokeball from pokemon legends arceus that has accurate materials with metal parts and wood and also electronics to make it spit smoke.
There isn't much printed in the project but the thing I did have to print are uploaded here, also the blender file in which I have all the items to scale to replicate the dimensions.

Here is the video about it: https://youtu.be/E_b_l4j9d-o?t=450

I used the timemark of the showcase because it's the coolest part for sure.

replica of the pokeball from pokemon legends arceus 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5554372.

I have made a replica of the thinker clock statue from the first case of the ace attorney franchise, you can find all the important stuff in the video I've published

https://youtu.be/Ol6XbTQO4Rc

For the audio file thingiverse doesn't let me upload a straight .waw file, I'll change it's extension, you should change audio.txt back to audio.wav

Ace Attorney thinker clock statue

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4834321.

I needed to tidy up all the cables behind my desk and, after using some adhesive solutions I decided to go for a permanent solution because adhesives can either be messy to remove or fall off within a few weeks. I made velcro strap holder that can be fixed in place with a screw, the velcro strips that it can hold are 1cm wide but you can easily edit stretching it in Cura, it's really easy to mount. i am making some utility models for my maker space, i suggest checking out my cgtrader page if you could be interested most should be free and shared between the two sites tho https://www.cgtrader.com/simone-azzoni24

Velcro strap holder wall mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4859787.

This is a remix of this model by SammySpeedruns https://www.thingiverse.com/thing:4836002 .
I needed a way of keeping my DS games from falling off without completing the row in my library and I decided to put there my Nintendo DS Lite, to do it I needed a stand and the original one did not seem as fitting as it could.

Nintendo DS lite stand.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6030528.

This is a keyboard-like button made for my circuit management system, it uses a 7*12.5mm spring, a common 6mm switch, and an m3 short screw.

CMS keyboard like button

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

agasabasement

Achievements

Seedling