Nimble V1 and Kryo mount for HEVO

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3151319.

This is a mount to allow you to make the Hevo not only direct drive, but also water cooled. It allows you to mount the Nimble and the Zesty Kryo water cooled hot end to the HEVO printer.

It has space for a BL Touch mount and the bracket for this is included.

There is space for the 50x50 radial fan, with air ducting to cool your part. Because the water cooling is often used in a heated chamber, I have included a clip for a Berd-Air tube in the main mount.

If you do not use the 50x50 fan, you can mount the BL Touch on the left side of the mount, so that all the parts stay within the limits of the back plate.

The STL models are checked and optimised. The parts that need a different orientation to print properly are rotated to the preferred printing position.

With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from Zesty Technology.