tracking pixel
Zesty T

Nimble Flex for Creality

by
Zesty.Tech
Follow
Follow
Remix Model
Zesty.Tech
Zesty.Tech
Image 1 of 2
Nimble Flex for Creality 3d model
2D
3D
Makes
Nimble Flex for Creality 3d model
Nimble Flex for Creality - Barbie princess - 3d model
This model is restricted by licensing terms. 
18 Likes76 DownloadsMay 7, 2021
This model is restricted by licensing terms. 


Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tornado, and others.

There are two main mount versions. One with nut traps and one with inserts.
The Flex needs a post on the side of the breech, these designs have a separate post. This allows the top surface of the mount to be flat.

Included are 4 different hot end mounts. All hot end mounts use the default hot end cooling fan. The hot end mounts are for the standard Creality hot end (or Microswiss version), the E3D V6, the Mosquito, and the Copperhead hot ends.

There are 3 different part cooling fans included, a 4010 radial fan, as found on the standard printhead, and two units to mount a 5015 radial fan. One for the left-hand side and one for the right-hand side.

Also included is a BL-Touch mount. All the mounts for the fans and the BL Touch are height adjustable.

Finally, I also uploaded basic versions of the hot end mount and the left-hand and right-hand adjustable plates. You can use these to design your own mounts for fans or a specific hot end.

All the parts are in Step format. If you want the STL files, have a look here: Thingiverse


18 Likes76 DownloadsMay 7, 2021




This model is restricted by licensing terms. 
18 Likes76 DownloadsMay 7, 2021
This model is restricted by licensing terms.