A remix of a remix.
https://www.thingiverse.com/thing:2846205
I wanted an extra hook that fit with the aesthetic. 
Printed at 20% infill I have tested it up to 40lbs without issue. Now I can hang my backpack on in a stall when it's missing the hook.

Hook Carabiner

Carabiner_12.3mf

I have a few of these UV flashlights, https://amzn.to/3KuQ927 
They work great with AAA batteries but I wanted to use my 18650. It's a little brighter and easier to recharge. While it works fine just dropping the 18650 battery in there, it works better with a shim. These take about 12mins to print with 15% infill at .28 layer height.
Print outside - in for dimensional accuracy.
There is a slight chamfer to help the battery into the hole.
Slide it about half way down the battery and it won't rattle in the flashlight. 


18650-adapter-for-UV-flashlight

I found a model similar to this about 5 years ago. It was an end of filament roll print. 5g of pla. I haven't been able to find it again so I decided to make my own. It is designed to have a pencil stuck into the end for extra reach. Manually scrape the nozzle if you have boogers. ;) 

- Print at .28 layer height.
- 30% - 40% grid infill
- 2 - 3 bottom layers
- 0 top layers


Nozzle Scraper

Wyze Cam v1 Light Mount using led touch/remote controlled LED lights (https://amzn.to/3QYewaz). 
The model is friction fit so depending on your print accuracy you may need to shrink it a few percent or use a heatgun to help the arms stick around the Wyze cam, or use some bluetak. 

I recommend printing it at a 45 degree angle (see pictures) and take advantage of zig-zag bottom layers so no supports will be needed.

I included a version with mouse ears for anyone with bed adhesion problems.

Printed in PLA on Ender 3 Pro 
- .28 layer height
- 195C Nozzle & 60C Bed
- 60mm/s
- 9g ~ 3M of filament
- No supports

Wyze Cam v1 Light Mount

wyze-light-mount.stl

Light mount for magnetically attached touch & remote control lights (https://amzn.to/3QYewaz) for my Ender3 Pro. I'm sure it will work with other similar lights and/or printers with a standard aluminum extrusion for the top rail. I used two m5-t-nuts and two m5x8 for mounting to the top rail. 
I have included 2 files. One with mouse ears on the corners for better bed adhesion. I did have slight curling on my first print, the mouse ears fixed it. Just fold to remove.

Printed in PLA on Ender 3 Pro
- .28 layer height
- 23g ~ 7.87M of filament
- 195C Nozzle & 60C Bed
- 70mm/s

Extra hardware needed:
- Touch & Remote LED Lights (https://amzn.to/3QYewaz).
- 2 x M5x8 bolts
- 2 x M5 t-nuts

Ender 3 Light Mount

ender3-light-mount.stl

Button is designed to fit in the power button hole. Tape it in place from the inside.
All other buttons holes are sufficiently large.

GoPro Style Mount for Acer Holo 360

Acer-Holo360-GoPro-mount-v3.stl

A 1x1x3 Gridfinity unit used to hold an XCarve Touch Sensor.

Gridfinity XCarve Touch Sensor Holder

I made a box using TinkerCAD shape generator for the LM2596s buck converter (https://amzn.to/3lGjPwJ). I liked this one because it has the built in voltmeter. Although larger than other LM2596s buck converters I like the features.
The holes fit m3 bolts and are designed to be _mounted_ from the bottom using m3 nuts on the inside. Combined with an XT60 Y-Cable (https://amzn.to/3GirFpy) and chopped micro-usb cable I am able to power my RasberryPi off of the Ender 3 Pro.

I had to set the buck converter to output 5.2V to not get the "low voltage" warning in Octoprint.

- I printed this is PLA.
- 0.28 layer height.
- No supports.

LM2596s-Box

LM2596s-Box.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Turboultra

Achievements

Novice Maker

Seedling

Voyager