Print settings:
No supports is required.
0.2mm layer height.

Materials needed:
- 2 Rubber bands
- 2 3x10mm bolts (or super glue)


Toy car loop

bottom.stl

For the Hairify competition.
Remix of Ballerina by mz4250
https://www.printables.com/model/14782-ballerina-collection

#hairify

Hairify dress ballerina

Hairy dress ballerina

A nozzle box with the shape of a ring box.
The box has a hidden compartment where you can store more nozzles or other goodies.

**Print instructions**
The box prints in place and is designed to be printed with 4 perimeters. No support is required.


Nozzle ring box with secret compartment

box.stl

A clip-on that blocks the xbox, view and menu buttons.

Requires no supports.

Xbox controller button blocker - Xbox One

Xbox controller button blocker - Series SX

A barbie sized toilet.
Use 1.75mm filament for the hinge.

Barbie toilet

toilet.stl

Split-flaps where the odd numbers have been replaced with hieroglyphics from the tv series LOST.

**Print instructions**
No support is required.

I printed the parts with 2 perimeters, 10% rectilinear infill and 0.2mm layer height.

I recommend splitting the flaps.stl in PrusaSlicer to fit smaller build plates.
Right-click the object -> Split -> To Objects.

Add a color change for the first and last layer when printing the flaps.

LOST split-flap counter

flaps-lost.stl

An optical illusion for the Prusa MK3S x-axis.

**Print Instructions**

Designed to be printed with 3 perimeters.
10% rectilinear infill. Some users have reported issues with 10% infill and have used 100% instead.
No support.

Before putting the pieces together, test the axis connector fit.

Longer print video:
https://www.youtube.com/watch?v=fn3wmHCaLBs

MK3S Optical illusion for x-axis

middle-wheel.stl

A cable clip that requires no screws or nails.
Put the clip on the cable and then slide it in between the wall and floor molding.
Perfect for rentals or when you don't want to leave a mark.

Cable clip with no screws or nails

cable-clip-open-10mm.stl

A Kingdomino castle that fits in the box.
Wall thickness optimized for 0.4 nozzles.

No supports is required.

**Support / Reseller**
If you want to support me or sell my models, take a look at my Patreon:
https://www.patreon.com/thomash3d

You can also send me a tip on paypal:
https://www.paypal.me/thhen

Kingdomino Castle

castle.stl

A revolving frame that fits two pictures.
Choose the side that matches your current mood.

For pictures with the size 150mm x 100mm.

No support is required.

Mood swing frame

horizontal-frame-2.stl

Organic easter egg with a screw bottom.

Height: ~115mm.

Can be printed without supports.

Organic egg with screw bottom

egg.stl

A slim tray to store the discarded tiles.
Refilling the bag has never been easier!

 
**Support / Reseller**
If you want to support me or sell my models, take a look at my Patreon:
https://www.patreon.com/thomash3d

You can also send me a tip on paypal:
https://www.paypal.me/thhen

Slim Azul tray

Sandworm based on Dune 2021.


Roughly the same size as the first player marker in the board game Dune Imperium.

~43mm in diameter.

Dune sandworm - first player marker for imperium

Insert for Dune Imperium with the expansion Rise of Ix. Fits in the existing card board insert.

Designed for sleeved cards.


The wall thickness is optimized for a 0.6 nozzle but can be printed with a 0.4 nozzle as well.

Each file indicate how many you should print.


First player marker that fits in this insert:
https://www.printables.com/model/272191-dune-sandworm-first-player-marker

Updated 2022-12-11: Added fillets versions.

 
**Support / Reseller**
If you want to support me or sell my models, take a look at my Patreon:
https://www.patreon.com/thomash3d

You can also send me a tip on paypal:
https://www.paypal.me/thhen

Dune Imperium insert

2x-imperium-hagal-cards.stl

A rolling ruler with 5mm steps.

The pieces are press fit. If loose, add some glue.

The diameter of the disc should be as close to 31.83mm as possible for the most accurate measurements.

Rolling ruler for keychain

disc.stl

Print each part, see print instructions.

Cut away the wall from the beard with a knife.

Screw the beard into the hat. Use the help tool if the fit is tight.

Use a hair dryer/hot air gun to slowly heat up the beard while you use a hand to form it (use lowest setting). It's also possible to use warm water.

Insert the spring into the beard and then the base.
 

**Print instructions**
All parts has been optimized to not need any support.

The beard is designed to be printed with a 0.2 layer height.

The beard prints better with the classic perimeter generator in prusaslicer.

Bobblehead gnome

hat.3mf

A fully printable and easy to assemble split-flap counter.

**Print instructions**
No support is required.

I recommend splitting the flaps.stl in PrusaSlicer to fit smaller build plates.
Right-click the object -> Split -> To Objects.

Add a color change for the first and last layer when printing the flaps.

Split-flap counter - Fully printable

flaps-drum-left.stl

A simple game where you stack chairs.

**Rules**
Variant 1
- Decide how many rounds you want to play
- The youngest player starts by placing a chair on a flat surface
- The next player stacks a chair on top of the first chair
- The round ends when the stack falls
- The player that knocks over the stack gets a penalty point for each chair knocked over
- The next player in turn starts the new round
- The winner is the player with the least amount of penalty points after all rounds have been played

Variant 2
- Distribute the chairs evenly amongst all players
- The youngest player starts by placing a chair on a flat surface
- The next player stacks a chair on top of the first chair
- If a player knock over some chairs during a turn, he/she must take them
- The winner is the player that first get rids of all his/hers chairs

The more chairs you print, the harder it gets!

**Print instructions**

No supports, the chairs are designed to be printed with bridges.
Use brims!

**Support / Reseller**

If you want to support me or sell my models, take a look at my Patreon:

https://www.patreon.com/thomash3d

You can also send me a tip on paypal:

https://www.paypal.me/thhen

Chair stacking game - No supports

Print each part, see print instructions.
Cut away the wall from the beard with a knife.
Assemble the parts and then use a hair dryer/hot tap water to slowly heat up the beard while you use a hand to form it.

For most control, use water. For crazy beard, use hair dryer.
Be careful not to burn yourself.

Tip: put the hair dryer on the edge of a table so you can use both hands.

After you have formed the beard, you can use scissors to make some final adjustments.

**Print instructions**

All parts has been optimized to not need any support. 

The beard should be printed with a 0.2 layer height.

The beard prints better with the classic perimeter generator in prusaslicer.

**Support / Reseller**

If you want to support me or sell my models, take a look at my Patreon:

https://www.patreon.com/thomash3d

You can also send me a tip on paypal:

https://www.paypal.me/thhen

**Extra pack**
Want some more variation?
Buy the extra pack:

https://www.cgtrader.com/3d-print-models/house/decor/bearded-christmas-gnome-extra-pack
The extra pack is included in the commercial tier on my Pateron.



Cute standing gnome

hat.stl

Print each part, see print instructions.
Cut away the wall from the beard with a knife.
Assemble the parts and then use a hair dryer/hot tap water to slowly heat up the beard while you use a hand to form it.

For most control, use water. For crazy beard, use hair dryer.
Be careful not to burn yourself.

Tip: put the hair dryer on the edge of a table so you can use both hands.

After you have formed the beard, you can use scissors to make some final adjustments.

 

**Print instructions**

All parts has been optimized to not need any support. The overhang on the body is 45deg.

The beard should be printed with a 0.2 layer height.

The beard prints better with the classic perimeter generator in prusaslicer.

 
**Support / Reseller**

If you want to support me or sell my models, take a look at my Patreon:

https://www.patreon.com/thomash3d

You can also send me a tip on paypal:

https://www.paypal.me/thhen

 



 

Cute ornament gnome

If you want to support me or sell my designs check out my Patreon
https://www.patreon.com/thomash3d

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ThomasH

Achievements

Seedling

Explorer

Fan Favorite