Make these adorable flame devil lights for Halloween with Basic PLA. Print the main flame and slip over one of the faces. Play around with different color combos. Orange/Black and White/Black are my favorites. It uses standard 38mm electric tea lights.
The flame devil lights are available in 3 different sizes. These are not just upscaled in Bambu Studio, I exported the model directly from CAD to make it bigger but also maintain the 2 & 3 walls to avoid huge printing times.
100% > 67mm x 67mm x height 95mm (2.6" x 2.6" x 3.7") 175% > 117mm x 117mm x height 165mm (4.6" x 4.6" x 6.5") 250% > 165mm x 165mm x height 235mm (6.5" x 6.5" x 9.2")
Warmwhite tealights: https://amzn.to/46StMho Alternatively you can experiment with RGB tealights: https://amzn.to/4dKxGL8 I may earn a commission on qualifying purchases (at no extra cost to you)
3MF file is made in Bambu Studio and optimised for Bambu Lab printers. Auto tree supports are activated and can be easily removed. Brim with 5mm is activated too. If you know that your bed adhesion is superb try to deactivate it, this will save you some time removing it by hand. For the bigger versions 175% and 250% I wouldn't recommend turning off the brim else it may cause a Spaghetti Monster! Also don't change the seam position! On the outer faces with the slit on their back I put the seam position on purpose not in the center because that always caused a failed print when it's exactly on the edge.
Product pictures for my commercial tier subscribers are free to use for their sales listings. Downloads in the attachments.