Ice cream bar magnets with multiple options for printing:
- All in one (for multicolor printers)
- Separate parts on the same plate
- Separate parts on different plates

The well for the magnet is a "negative part" in the model, and can be easily scaled in the slicer for whatever sized magnet you have. By default they are 1/2" round magnets.

Please note: these are provided as .3MF files from Bambu Dektop, if you need the raw STL please let me know and I'm happy to provide them.

Mickey Ice Cream Bar Magnets

Ice Cream Bar - Separate Plates.3mf

Model
Proudly display your favorite Lego or Lego Compatible minifigs with this ornament. It's printed in multiple parts to minimize the supports needed. It can be set up to either hang from a string like a traditional ornament, or with a sleeve that slips over a standard mini bulb for a lighted ornament.

 

To assemble:

Print the ornament front, back, stud connector, and plate holder. You will likely need to use supports on the ornament front. I've found success printing the back “face up” so the smooth back is on the bed, and the front “face up” as well with supports on the interior. If you're using a coextruded multicolor filament be sure to orient the front and back in the same direction so the colors line up.

Print either the two-hole ornament hanger for use with string, or the single hole for use with a mini bulb.

Use your favorite glue to connect the stud connector and plate holder, then glue the assembly into the back of the ornament (just under the bump on the back). Glue the front in place. The ornament hanger screws in so you can change it out as needed.

Lego Minifig Display Ornament

LegoOrnamentComplete.3mf

A small magnet in the shape of a novelty waffle! Perfect for giving away as "pixie dust" or on cruise "[fish extenders](https://www.cruisecritic.com/articles/fish-extenders-on-disney-cruise-line)." 
The .3mf file labeled "Mouse Waffles - 3 Sizes" includes holes for 1/2 inch and 3/4 inch magnets. The file labeled "Waffle - Flatface" contains the original mesh without the magnet hole so you can add a hole in any size you need.


Smiling Mouse-shaped Waffle Magnet

Mouse Waffles - 3 Sizes.3mf

Same great threads, now with a much more aesthetically pleasing dragon egg! 

There are 4 basic designs in this set:
- Hollow single piece egg
- Solid single peice egg (for scaling down)
- Thin wall two part threaded egg (for printing as-is or scaling up)
- Thick wall two part threaded egg (for scaling down)

If you are printing these to fit flexi-dragons you may wish to scale up the threaded egg to 100mm in diameter. The dragons will fit as-is, but it's a tight fit and may be frustrating to small children.

New and Improved Threaded Dragon Egg

ThinnerWallThreadedEgg.3mf

Threaded dragon egg in two sizes - 105mm diameter and 65mm diameter. 

Threaded Crystal Dragon Egg - Large and Small

Crystal Egg 65mm Top.3mf

Two different versions are available of this model: a two part threaded version, and a one part version. The single part egg is hollow in for faster and lighter printing.

Note: Dragon inside is shown as an example only and is _not_ included in the model.

Update 1/11/24: A second version with a wider base for easier printing has been added. 

Large Threaded Scaly Egg

Scaly Egg Large Threaded.3mf

Scaly Egg Large Threaded.stl

Egg2.3mf

There's a new egg design available, based on the old one but rebuilt from the ground up. Same great threads, totally reworked scales.This design is available in 4 different modes: thin and thick walled threaded containers, a hollow one piece egg, and a solid one piece egg. Commercial licensing is available, see profile for plan information.

 There's a new egg design available, based on the old one but rebuilt from the ground up. Same great threads, totally reworked scales. This design is available in 4 different modes: thin and thick walled threaded containers, a hollow one piece egg, and a solid one piece egg.  Commercial licensing is

New dragon egg design available

Want to sell printed items? This is the license you're looking for. 

Commercial Licensing

ThickWalls.3mf

SmallSolidEgg.3mf

SmallHollowOnePieceEgg.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sprocket Studios

Designer posts

New dragon egg design available

Pinned models

New and Improved Threaded Dragon Egg

Mickey Ice Cream Bar Magnets

Lego Minifig Display Ornament

Smiling Mouse-shaped Waffle Magnet

New and Improved Threaded Dragon Egg

Threaded Crystal Dragon Egg - Large and Small

Large Threaded Scaly Egg