Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com

Plan Your Build & Get Hardware

ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoBass - Head - Headless, on our site.

Step 1: Insert Heat Set Inserts

Using a soldering iron, put in the heat set inserts so they are flush and straight.

Step 2: Attach to Neck

Bolt the headless head assembly to the neck / 2020 interface as shown.

Step 3: Attach String Anchors

Install the string anchor components in the order shown.

Step 4: Insert Nut Adjustment Grub Screws

Thread in the grub screws for nut / action adjustment; tighten evenly and adjust under string tension as needed.

Hardware DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.82 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $45.96.

• 2x Screw - Socket Head - M6x25
• 4x Heat Set Insert - M3 - 5mm OD - 4mm L
• 4x Screw - Grub - M3x16
• 1x String Anchors