MUNBYN LABEL HOLDER

As with all of my projects, I wasn't completely happy with the other solutions out there. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should work with other brands as well.

NEEDED HARDWARE 4 - M4-0.7 x12mm Flat Head Screws

UPDATE 5-15-23 Added sides that hold a 608zz bearing. This was requested, so I am adding them to the project. Added Tray v2 to allow longer M4-0.7 Flat head screw. Added Tolerance print for the bearing side to see if your bearings will fit before you print the entire side. UPDATE 5-16-23 Added second roller that fits the inside of the bearings tighter Updated the bearing sides for the new roller WHAT'S IN THE DOWNLOAD Tray (12mm screw) Tray v2 (Any length works. I wouldn't go over 16mm) Side 1 Side 2 Side 1 that fits a 608zz bearing Side 2 that fits a 608zz bearing Roller Roller that fits bearings tighter You need 2 sides, a roller, a tray, and 4 screws to build. If you choose the bearing sides, then you need 2 608zz bearings. The files are clearly marked for which are for use with bearings.

3D PRINTING SETTINGS Layer Height - 0.2mm - 0.3mm Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.