tracking pixel
Snow H

additional Indicator and Control Mount for Radiator Mount for CNC3020

by
SnowHead
Follow
Follow
Remix Model
additional Indicator and Control Mount for Radiator Mount for CNC3020 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
0 Likes1 DownloadsApril 5, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4178050.

In the previous simple version water pump and fans are always running on full speed which is not necessary, loud and annoying. Additional to the already mounted parts with the parts provided here a temperature controller board can be mounted and, if wished, a flow- and temperature indicator too. The board holder is mounted above the radiator holder with the same bolts. The case for the temperature indicator is glued on this holder. The flow indicator is glued on top of the case. The indicator case has two holes to mount two UV-LED to illuminate the vane. The goal to not increase the size of the machine was reached. All parts are mounted within the original outer dimensions of the device. To control the pump, the controller board must be a type for 2- or 3-wire fans. A 4-wire controller will not work because the pump doesn't have a pwm-control-input. Watch a clip of the finished extension here: https://www.youtube.com/watch?v=BFLYIL3ggew

Controller: https://www.aliexpress.com/item/32922455086.html Flow Indicator: https://amazon.de/gp/product/B07FLG7MQJ Temperature Indicator: https://amazon.de/gp/product/B07N2WM7LL Controller Sensor: https://amazon.de/gp/product/B07QLMFB1B


0 Likes1 DownloadsApril 5, 2022




This model is restricted by licensing terms. 
0 Likes1 DownloadsApril 5, 2022
This model is restricted by licensing terms.