The AKARI vase has a modern, minimalist character through its soft curves and sharp grooves. The texture creates a fine sense of depth and catches the light in a subtle way. This also makes the vase slightly heavier for a premium feel. Together with the narrow neck and serrated opening, this vase is an elegant accent in your space.

Place this vase on your side table or sideboard. The narrow opening is ideal for a few eucalyptus branches, dried oats or pampas. You can also combine the AKARI vase with other vases in different heights. The vertical lines ensure that the vase stands out beautifully, even when you leave it empty.

Dimensions: D10.7 x H20 cm Resizable: yes, in your slicer 3D Model Type: shelled body Printing technique: FDM / FFF / SLA File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings Nozzle diameter: 0.4mm, 0.6mm, or larger Bottom and top layers: 4 Infill: 5% Perimeters: 2 Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: default Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon. or Thangs Membership

Thank you for respecting the time and effort that goes into each creation.