tracking pixel
S

Small needle file handle 3.5mm hole

by
Sagittario
Follow
Follow
Remix Model
S
Sagittario
Image 1 of 2
Small needle file handle 3.5mm hole 3d model
2D
3D
Makes
Small needle file handle 3.5mm hole 3d model
Small needle file handle 3.5mm hole 3d model
This model is restricted by licensing terms. 
3 Likes7 DownloadsDecember 15, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1963097.

This is simple file handle suitable for small needle files with 3.5mm handles.

The handle is 50mm long and 11mm diameter.

I made this because most of the ones on Thingiverse were too big for my liking.

If the hole is too small when printed, just use a cordless drill running in reverse with a 3-3.5mm drill as required. Don't run the drill forwards as this will cause it to 'grab' and you'll probably end up with a misaligned hole or injury.

Print this on a raft or brim with 3 perimeters and 25-35% infill


3 Likes7 DownloadsDecember 15, 2022




This model is restricted by licensing terms. 
3 Likes7 DownloadsDecember 15, 2022
This model is restricted by licensing terms.