Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3366983.

Bracket to hang Logitech Z200 Speakers, probably works for the newer 207 series, haven't tried.  Has recesses to allow for wall anchors.  Links below to the products.


* [Logitech Speakers](https://amzn.to/2RXlD7d)
* [Wall Anchors](https://amzn.to/2W4DqIQ)

Logitech Speaker Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3365516.

My take on the ever popular tool to easily and accurately create rabbet and dados with a table saw, graduations added to each side for the estimated kerf and stock width, should just be used as a guide, this is 3d printing after all. 

Designed specifically to print without supports ( You'll probably have to rotate one of the parts, I don't think I uploaded the correct print orientation, but should be an easy print )

You'll only need 3 different parts, I tried to stick with parts that a lot of us with 3d printers might have laying around, links to amazon below, disclaimer that they are affiliate links if you choose to support my work great, if not that's cool too ;o)

Also you'll need a solder iron to set the heated insert and I just used epoxy to hold the bolt in the knob ( yea, was being lazy there but it actually looks pretty cool if you fill the hole to the top with clear epoxy on top of the bolt)

- 1 each [M3 20mm and M3 12mm bolt](https://www.amazon.com/gp/product/B072FKMYMF/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B072FKMYMF&linkCode=as2&tag=randombitsoft-20&linkId=3ae81924289d9342f9d9bf1b23e7c49d)
- 2 [M3 heated inserts](https://www.amazon.com/gp/product/B072FKMYMF/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B072FKMYMF&linkCode=as2&tag=randombitsoft-20&linkId=3ae81924289d9342f9d9bf1b23e7c49d)
- [Epoxy](https://www.amazon.com/gp/product/B072FKMYMF/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B072FKMYMF&linkCode=as2&tag=randombitsoft-20&linkId=3ae81924289d9342f9d9bf1b23e7c49d)

See assembly image attached, should be pretty self explanatory.  Also, mostly parametrized, fusion 360 design can be found attached as well if you wish to modify.

Kerfsetter Mini

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3388970.

My take on a, somewhat, minimal pi zero w camera case.  Allows accessing the GPIO headers, has recesses for optional magnets for mounting to metal studs, refrigerators, etc... As well as recesses for M3 nuts you can use to secure custom made brackets. Links to parts needed are affiliate links if you feel like supporting my work.

Step files are attached if you'd like to make edits or custom brackets to mount the case.

## Parts Needed

* [I used this assortment which has all you need below and more for future projects](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)
  * 4 - M2x4  (for camera)
  * 4 - M2x8  (for pi zero)
  * 4 - M3x16 (for case back to case front)
  * (Optional) - 0 - 6 M3 Hex nuts for custom bracket mounting
* [Also bought a magnet assortment here](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)
  * (Optional) - 12x3mm neodymium magnets
* [5 min Epoxy](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US) or some [Super Glue](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US) - I highly recommend the epoxy but the super glue is decent as well

Of coarse you need these if you don't already have them:
* [Pi Zero W](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)
* [Pi Camera V2](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)
* [Pi Zero Camera Cable 150mm length](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)
* [Micro SD Card](https://www.amazon.com/gp/product/B07HVLQPMQ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=randombitsoft-20&linkId=48b59e104ec4927a5f7c25bc3b83bff3&language=en_US)




Pi Zero W Camera Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3365079.

Table saw pushstick, quickly drawn to fit my Prusa MK3 print bed.  Original design found [here](http://www.craftsmanspace.com/free-projects/push-stick-and-push-block-plans.Html)


Tablesaw Pushstick

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

RubenRybnik

Achievements

Seedling

Trailblazer

Logitech Speaker Wall Mount

Kerfsetter Mini

Pi Zero W Camera Case

Tablesaw Pushstick