Choo-Choo! Coming through! This miniature toy train set with or without presents surrounds your miniature 3d printed Christmas tree display. This train really moves with the use of your finger. The rail is a groove! The train prints on a skinny rail that you can trim and slide into the grooved rail.
Make sure that the track and base is on a non slip surface for best train movement.
Make sure track and train have cooled significantly on your build plate before removing to prevent warping!
You can use the RetroMaker Xmas Tree https://than.gs/m/971750 printed at 150% to perfectly fit this 80mm diameter center. Or you can scale this to whatever your printer will fit to match whatever tree you want these presents around. Presents include a Teddy Bear, Drum, Soldier, Doll, Racecar, Ball, Cabin, a Rocking Horse, as well as an assortment of wrapped presents.
Print Directions: 0.2mm layer height 0.4mm nozzle Supports with settings for a 20 degree overhang threshold 10% Infill
Designed to print the base "skirt" as a color filament swap. Color Swap Layers 0.0mm - 0.4mm Red 0.6mm - 0.8mm Green 1.0mm - 1.2mm Gold 1.4mm - end Color of the toys and track.
Print Train at 0.2mm layer height and make sure to have the proper circle first layer. No supports needed for the train print. Trim excess track with sharp sidecutter snips from the front and back of the train for best results.
Creative Commons License 4.0 BY-NC-ND If you would like to sell this or any of my other models you can purchase a monthly commercial license subscription.