Here's a cute little smiley turtle with a decorative shell 🐢

Hope you like it!

**Happy printing!** 😃

_Grab the #exclusive base version of the Turtle on my Patreon page : https://www.patreon.com/RandomizY_
_
**. No support needed
. Size is 10 x 10,7 x 5,8 cm (X,Y,Z)**
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Turtle_Decorative.stl

Today's my birthday! 🥳
So, I'm sharing this cupcake to somehow celebrate it with all of you! 🧁 

_Grab the Cupcake 2 #exclusive on my Patreon page : https://www.patreon.com/RandomizY_
_
**. No support needed
. Size is around 6 x 6 x 7 cm (X,Y,Z)**
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Cupcake 

Cupcake.stl

I present to you my first ever **_RandoVase_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts!_ 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Anycubic Mega S
. Nozzle: 0.6 mm
. Slicer: Cura 4.13.1
. Layer height: 0.3 mm (2 wall thickness; 0 top/ 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temperature: 60°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Silk Gold PLA by SUNLU
. Size: 9,2 x 9,2 x 12 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

RandoVase

I present to you my first ever **_RandoVase_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts! 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Anycubic Mega S (RandoVase)
. Nozzle: 0.6 mm
. Slicer: Cura 4.13.1
. Layer height: 0.3 mm (2 wall thickness; 0 top/ 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temperature: 60°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Silk Gold PLA by SUNLU
. Size: 9,2 x 9,2 x 12 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

I present to you my first ever **_RandoBowl_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts!_ 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Fokoos Odin-5 F3
. Nozzle: 0.4 mm
. Slicer: Cura 4.13.1
. Layer height: 0.24 mm (2 wall thickness; 0 top / 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temp: 55°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Sea Glass Rainbow TPU by Eryone
. Size: 9,3 x 9,3 x 6 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

RandoBowl

I present to you my first ever **_RandoBowl_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts! 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Fokoos Odin-5 F3
. Nozzle: 0.4 mm
. Slicer: Cura 4.13.1
. Layer height: 0.24 mm (2 wall thickness; 0 top / 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temp: 55°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Sea Glass Rainbow TPU by Eryone
. Size: 9,3 x 9,3 x 6 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Here's my last gift for you guys for this year's Mother's Day ☺️

I wanted to create something a bit different for this model.
So I thought...why not trying making an abstract sculpture?

Something that could be elegant and classic, but also that represents the warmth and love of a mother for her child.

Hope you will enjoy printing this statue 🥰

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printer: Fokoos Odin-5 F3
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.2 mm (3 walls thickness; 8 top / 3 bottom layers)
- Infill : 10%
- NO Support
- Printing Temperature: 212°C / Build Plate - Temperature: 60°C
- Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
- Filament: Marble PLA by SUNLU
- Size: 9,8 x 7,2 x 12,4 cm (X,Y,Z)

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Abstract Mother and Child.stl

Here's my last gift for you guys for this year's Mother's Day ☺️

I wanted to create something a bit different for this model.
So I thought...why not trying making an abstract sculpture?

Something that could be elegant and classic, but also that represents the warmth and love of a mother for her child.

Hope you will enjoy printing this statue 🥰
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Fokoos Odin-5 F3
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (3 walls thickness; 8 top / 3 bottom layers)
🔸 Infill : 10%
🔸 NO Support
🔸 Printing Temperature: 212°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filament: Marble PLA by SUNLU
🔸Size: 9,8 x 7,2 x 12,4 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Abstract Mother's Day Statue.stl

Sharing something about my homeland ☺️

The **pumo** is an **Italian traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Apulian Pumo (2):** https://thangs.com/designer/RandomizY/3d-model/Apulian%20Pumo%20(2)-62139

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printers: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
- Infill : 0%
- Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
- Filaments: Silk Blue PLA by Eryone
- Size: 9,5 x 9,4 x 10 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Italian Apulian Pumo (1)

Sharing something about my homeland ☺️

The **pumo** is a** traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printers: Geeetech A10
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
🔸 Infill : 0%
🔸 Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filaments: Silk Blue PLA by Eryone
🔸 Size: 9,5 x 9,4 x 10 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Apulian Pumo (1)

Sharing something about my homeland ☺️

The **pumo** is an **Italian traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Apulian Pumo (1):** https://thangs.com/designer/RandomizY/3d-model/Apulian%20Pumo%20(1)-62140

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printers: Anycubic Mega SE
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
- Infill : 0%
- Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
- Filaments: Silk Copper PLA by SUNLU
- Size: 9,8 x 9 x 12 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Italian Apulian Pumo (2)

Sharing something about my homeland ☺️

The **pumo** is a** traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printers: Anycubic Mega SE
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
🔸 Infill : 0%
🔸 Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filaments: Silk Copper PLA by SUNLU
🔸 Size: 9,8 x 9 x 12 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Apulian Pumo (2)

I've made a double sided Easter little Diorama, mixing both 2D and 3D pieces.

You can have fun by printing all the pieces separated and decorate each piece as you prefer before composing your little diorama!

Hope you like it!

**Happy Easter everyone!!** 🐰

(_You get both separated pieces and full version with this file.
You can also find a "special" part which will be used for SUNLU contest [here](https://www.facebook.com/groups/sunlucommunity/posts/2216636418493798/?__cft__[0]=AZUBag8Rol66-JMs1oZky42cRRTIZ8OF8gZMn137QDUTNyhKnn2fuzpGNH_eb_PnsTNOwRSFxUschb2RXcnWp33fHv1FN4Fc0uxOZEQXAZK34DiVyvZE9l75PaINmUO_h7Zn8nFNz-vCcWBPRnnLdrpS&__tn__=%2CO%2CP-R)_)
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printers: Anycubic Mega S/SE | Fokoos Odin-5 F3 | Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.3 mm (0.4 mm wall thickness; 3 top / bottom layers)
- Infill : 50% (Lightning)
- No support needed
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 60 mm/sec | Outer Wall Speed: 30mm/sec
- Filaments: SUNLU
- Size: Full version 8,7 x 8,2 x 12 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Easter Little Diorama

Full.stl

Ground_back.stl

**_March is here and Spring season is around the corner_** 🌷

For this occasion, I decided to bring some cute and cheerful models

I think these little bunnies might be, other than a pretty decoration, also a perfect gift even for young children, both as toys and as models to practice some paintings 🎨

Hope they can bring you a smile and some happiness in your lives 🐰

**Book Lover Bunny (1)** :  https://thangs.com/RandomizY/Book%20Love%20Bunny%20(1)-54769

#MakerMadness
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.16 mm (0.4 mm wall thickness; 4 top / bottom layers)
- Infill : 10%
- Some supports needed (mostly on the lower part)
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
- Filament: Pink PLA by Longer
- Size: 7,8 x 9 x 12 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Book Lover Bunny (2)

**_March is here and Spring season is around the corner_** 🌷

For this occasion, I decided to bring some cute and cheerful models

I think these little bunnies might be, other than a pretty decoration, also a perfect gift even for young children, both as toys and as models to practice some paintings 🎨

Hope they can bring you a smile and some happiness in your lives 🐰

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Geeetech A10
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.16 mm (0.4 mm wall thickness; 4 top / bottom layers)
🔸 Infill : 10%
🔸 Some supports needed (mostly on the lower part)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
🔸 Filament: Pink PLA by Longer
🔸Size: 7,8 x 9 x 12 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you are interested in selling 3D Printed items (not files) of my works, please visit my Patreon for a commercial license and other exclusive benefits_** : https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

**_March is here and Spring season is around the corner_** 🌷

For this occasion, I decided to bring some cute and cheerful models

I think these little bunnies might be, other than a pretty decoration, also a perfect gift even for young children, both as toys and as models to practice some paintings 🎨

Hope they can bring you a smile and some happiness in your lives 🐰

**Book Lover Bunny (2) :** https://thangs.com/RandomizY/Book%20Lover%20Bunny%20(2)-54770

#MakerMadness
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printer: Anycubic Mega SE
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.16 mm (0.4 mm wall thickness; 4 top / bottom layers)
- Infill : 10%
- Some supports needed (mostly on the lower part)
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
- Filament: Green PLA by SUNLU
- Size: 6,7 x 7,3 x 12 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Book Lover Bunny (1)

**_March is here and Spring season is around the corner_** 🌷

For this occasion, I decided to bring some cute and cheerful models

I think these little bunnies might be, other than a pretty decoration, also a perfect gift even for young children, both as toys and as models to practice some paintings 🎨

Hope they can bring you a smile and some happiness in your lives 🐰

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Anycubic Mega SE
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.16 mm (0.4 mm wall thickness; 4 top / bottom layers)
🔸 Infill : 10%
🔸 Some supports needed (mostly on the lower part)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
🔸 Filament: Green PLA by SUNLU
🔸Size: 6,7 x 7,3 x 12 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
If you are interested in selling 3D Printed items (not files) of my works, please visit my Patreon for a commercial license and other exclusive benefits : https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Book Love Bunny (1)

The clown is usually seen as someone who acts funny and clumsy to make his audience laugh, making us think he may be somehow "shallow", but he actually has a big heart and can be a true romantic.

Print this cute clown with a beautiful bouquet of flowers as a decoration or as a gift (_e.g. for the incoming Valentine's Day_) for someone special.
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻
**MY 3D PRINTING SETTINGS**

**_Filament_**

- 3D Printer: Anycubic Mega SE
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.12.1
- Layer height: 0.16 mm (0.8 mm wall thickness; 6 top / 3bottom layers)
- Infill : 10%
- Some supports needed
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
- Filament: Blue Silk PLA by Eryone
- Size: 3,1 x 5,4 x 8,7 cm (X, Y, Z)

**_Resin_**

- 3D Printer: Anycubic Photon Mono
- Slicer: Lychee Slicer 3.6.2
- Layer Thickness : 50um
- Burn in Layers:
Number of Layers (5) /Exposure Time (24)
- Normal Layers :
Light-off Delay (1) / Exposure Time (1,6) / Lift Distance (6)
- Lifting Speed 4mm/s / Lowering Speed 6mm/s
- Hollow Thickness : 1.5mm
- Infill : 20%
- Resin : Grey by Anycubic
- Washed & Cured with Elegoo Mercury Plus
- Size: 3,1 x 5,4 x 8,7 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Loving Clown

The clown is usually seen as someone who acts funny and clumsy to make his audience laugh, making us think he may be somehow "shallow", but he actually has a big heart and can be a true romantic.

Print this cute clown with a beautiful bouquet of flowers as a decoration or as a gift (_e.g. for the incoming Valentine's Day_) for someone special.
⸻⸻⸻⸻⸻⸻⸻⸻

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Anycubic Meha SE / Anycubic Photon Mono
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.12.1 / Lychee Slicer 3.6.2
🔸 Layer height: 0.16 mm (0.8 mm wall thickness; 6 top / 3bottom layers) / 50um (light-off delay 1 / exposure time 1.6s / lifting speed 4mm/s / lowering speed 6mm/s)
🔸 Infill : 10% / 20%
🔸 Some supports needed
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
🔸 Filament: Blue Silk PLA by Eryone / Grey Resin by Anycubic
🔸Size: 3,1 x 5,4 x 8,7 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Clown Flower

Want to feel safer while using your computer without worrying to have your webcam turned on? Or, anyway, want to protect your privacy at home?
Then this model may be the one you were looking for!

Thought for iMac users who want a design product which is not only useful, but also well suited to iMac shapes.

_Composed by two parts easy to assemble. No glue needed_ (_your computer will be grateful!_).
**_Just insert the slider into its track and it's ready to use!_**

_P.S. Be sure to turn off "_**Automatically adjust brightness**_" in _**System Preferences**_ > _**Display**_ since the clip covers its sensor._

Try it and give your feedback!

Please don't hesitate to contact me for any inquiries.
⸻⸻⸻⸻⸻⸻⸻⸻

**MY 3D PRINTING SETTINGS**

- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Cura 4.2.1
- Layer height: 0.2 mm (0.8 mm wall thickness; 3 top/bottom layers)
- Infill : 20%
- No support needed
- Printing Temperature: 200°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec / Outer Wall Speed: 25mm
- Filament: Silver Silk PLA+ by SUNLU
- Size: 55 x 18.3 x 25.8 mm (Clip) ; 17.9 x 17.9 x 2.8 mm (Slider) (X,Y,Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Mac Camera Cover_Clip Slider

Mac_Clip_RandomizY.stl

I tried to represent a hoopoe, a distinctive genus of birds with a surprising appearance, captured in a relaxing moment, on top of a log.

Hope you like it!

You can print this Hoopoe as decoration to give a more classy touch to your home.

_(I've divided the model into more parts to make it print more easily.
6 STLs included: Full, Truck, Hoopoe, Body, Paw_Left, Paw_Right)_
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printer: Geeetech A10 / Anycubic Mega S / Anycubic Photon Mono
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.12.1 / Lychee Slicer 3.6.2
- Layer height: 0.16 mm (0.8 mm wall thickness; 6 top/3bottom layers) / 45um (light-off delay 1 / exposure time 1.6s / lifting speed 4mm/s / lowering speed 6mm/s) 
- Infill : 10%
- Support needed (not for the trunk),
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec / Outer Wall Speed: 25mm
- Filament: Silver Silk PLA+ by SUNLU / Brown PLA by Longer  / Grey Resin by Longer

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Hoopoe

Christmas Decorations are never enough! 🎄

What about printing some simple but still elegant Stylized Christmas Tree ornaments to decorate your home? 🎄

(_I created two different shapes of stylized trees inspired by the figures realized according to the origami technique_)

Hope you like them!

**Christmas Stylized Tree Decoration Origami #1 here** : https://thangs.com/RandomizY/Christmas-Stylized-Tree-Decoration-Origami-1-40943
⸻⸻⸻⸻⸻⸻⸻⸻
If you enjoy my work, please don't forget to leave a like!
⸻⸻⸻⸻⸻⸻⸻⸻
MY 3D PRINTING SETTINGS

- 3D Printer: Anycubic Mega S
- Nozzle: 0.4 mm
- Layer height: 0.2 mm (2 wall thickness; 4 top/3bottom layers)
- Print time: Around 3 hrs
- No Infill
- No Support needed (you can use brim or raft if you want to be sure to have it adheres to the build plate)
- Print speed: 40 mm/s / Outer Wall Speed: 20 mm/s
- Filament: Silk Gold by Enotepad / Sunlu | Red Glitter PLA by Eryone
- Size: 7 x 3,2 x 10 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Christmas Stylized Tree Decoration Origami #2

Christmas Decorations are never enough! 🎄

What about printing some simple but still elegant Stylized Christmas Tree ornaments to decorate your home? 🎄

(_I created two different shapes of stylized trees inspired by the figures created according to the origami technique_)

Hope you like them!

**Christmas Stylized Tree Decoration Origami #1 here** : https://thangs.com/RandomizY/Christmas-Stylized-Tree-Decoration-Origami-1-40943
⸻⸻⸻⸻⸻⸻⸻⸻

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Anycubic Mega S
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.12.0
🔸 Layer height: 0.2 mm (2 wall thickness; 4 top/3bottom layers)
🔸 Print time: Around 3 hrs
🔸 No Infill
🔸 No Support needed (you can use brim or raft if you want to be sure to have it adheres to the build plate)
🔸 Print speed: 40 mm/s / Outer Wall Speed: 20 mm/s
🔸 Filament: Silk Gold by Enotepad / Sunlu | Red Glitter PLA by Eryone
🔸 Size: 7 x 3,2 x 10 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Christmas Decorations are never enough! 🎄

What about printing some simple but still elegant Stylized Christmas Tree ornaments to decorate your home? 🎄

(_I created two different shapes of stylized trees inspired by the figures realized according to the origami technique_)

Hope you like them!

**Christmas Stylized Tree Decoration Origami #2 here** : https://thangs.com/RandomizY/Christmas-Stylized-Tree-Decoration-Origami-2-40945
⸻⸻⸻⸻⸻⸻⸻⸻
If you enjoy my work, please don't forget to leave a like!
⸻⸻⸻⸻⸻⸻⸻⸻

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Anycubic Mega S
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.12.0
🔸 Layer height: 0.2 mm (2 wall thickness; 4 top/3bottom layers)
🔸 Print time: Around 6 hrs
🔸 No Infill
🔸 No Support needed (you can use brim or raft if you want to be sure to have it adheres to the build plate)
🔸 Print speed: 40 mm/s / Outer Wall Speed: 20 mm/s
🔸 Filament: Green, White by Enotepad / Sunlu
🔸 Size: 9,1 x 9,1 x 10 cm (X, Y, Z) 

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Christmas Stylized Tree Decoration Origami #1

Christmas Decorations are never enough! 🎄

What about printing some simple but still elegant Stylized Christmas Tree ornaments to decorate your home? 🎄

(_I created two different shapes of stylized trees inspired by the figures created according to the origami technique_)

Hope you like them!

**Christmas Stylized Tree Decoration Origami #2 here** : 
⸻⸻⸻⸻⸻⸻⸻⸻

𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Anycubic Mega S
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.12.0
🔸 Layer height: 0.2 mm (2 wall thickness; 4 top/3bottom layers)
🔸 Print time: Around 6 hrs
🔸 No Infill
🔸 No Support needed (you can use brim or raft if you want to be sure to have it adheres to the build plate)
🔸 Print speed: 40 mm/s / Outer Wall Speed: 20 mm/s
🔸 Filament: Green, White by Enotepad / Sunlu
🔸 Size: 9,1 x 9,1 x 10 cm (X, Y, Z) 
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

"**_Pika Pika, Pikachu ~_**" 💛

Christmas is almost here ~ ! 
Have you already started decorating your home for this holiday or you're still not ready for it? 🎄
Well, in both cases, what about printing this cute little Pikachu in a Christmas sock to bring some happiness into your house? 🎄

(_3 STLs included: Head, Sock and Full_)
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻
**MY 3D PRINTING SETTINGS**

- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.12.0
- Layer height: 0.12 mm (2/3 wall thickness; 4 top/3bottom layers)
- Infill : 15%
- Support needed
- Printing Temperature: 216°C / Build Plate Temperature: 64°C
- Print speed: 35 mm/sec / Outer Wall Speed: 16 mm/s
- Filament: Red Glitter PLA by Eryone
- Size: Full : 5,6 x 4,3 x 10,53 cm (X , Y , Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Christmas Pikachu Decoration

Full ver.stl

The wolf is one of the most majestic animals of the world, and he becomes even more fascinating thanks to one of it's typical and peculiar pose : howling in the moonlight 🐺🌕

Print this howling wolf as decoration to give a more classy touch to your home.

(_3 STLs included: Wolf, Rock and Full_)
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻
**MY 3D PRINTING SETTINGS**
- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.11.0
- Layer height: 0.16 mm (0.8 mm wall thickness; 6 top/3bottom layers)
- Print time: Wolf around 8hrs / Rock around 5hrs
- Infill : 10%
- Support needed (not for the rock),
- Printing Temperature: 205°C / Build Plate Temperature: 60°C 
- Print speed: 50 mm/sec / Outer Wall Speed: 25mm
- Filament: Silver Silk PLA+ by SUNLU
/ Brown PLA
Size: Wolf 4,7 x 10,8 x 8,5 cm (X , Y, Z) / Rock 5 x 10,1 x 3,4 cm (X, Y, Z) / Full 5,5 x 11,7 x 11,5 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Howling Wolf

𝙄𝙩'𝙨 𝙣𝙤𝙩 𝙖 𝙨𝙞𝙢𝙥𝙡𝙚 𝙥𝙪𝙢𝙥𝙠𝙞𝙣 𝙖𝙣𝙙 𝙞𝙩'𝙨 𝙣𝙤𝙩 𝙖 𝙨𝙞𝙢𝙥𝙡𝙚 𝙨𝙠𝙪𝙡𝙡... 𝙞𝙩'𝙨 𝙩𝙝𝙚 𝙤𝙣𝙚 𝙖𝙣𝙙 𝙤𝙣𝙡𝙮 𝙋𝙪𝙢𝙥𝙠𝙞𝙣 𝙎𝙠𝙪𝙡𝙡!

What's better than printing this amazing spooky Pumpkin Skull to get ready and enjoy Halloween to the fullest? 🎃💀

Don't be scared and grab yours! 🎃💀

(3 𝙎𝙏𝙇𝙨 𝙞𝙣𝙘𝙡𝙪𝙙𝙚𝙙 : 𝙁𝙪𝙡𝙡 𝙫𝙚𝙧𝙨𝙞𝙤𝙣, 𝙋𝙪𝙢𝙥𝙠𝙞𝙣, 𝙎𝙩𝙚𝙢)
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**
⸻⸻⸻⸻⸻⸻⸻⸻

**MY 3D PRINTING SETTINGS :**

- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Cura 4.2.1
- Layer height: 0.2 mm (0.8 mm wall thickness; 8 top/ 3 bottom layers)
- Print time: 8h38min
- Infill : 10%
- Support needed
- Printing Temperature: 200°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec / Outer Wall Speed: 25mm
- Filament: Orange PLA by Eryone
- Size: 68.5 x 82.8 x 74.6 mm ( X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Pumpkin Skull

This model has been designed to make our new everyday life wearing the mask easier.

How many of you are tired of their glasses always fog up? And how many don't like the mask moving while talking?

This clip may be the solution you were looking for!
It is suitable for both 𝙘𝙡𝙖𝙨𝙨𝙞𝙘 𝙨𝙪𝙧𝙜𝙞𝙘𝙖𝙡 masks and 𝙁𝙁𝙋2

Comes with 2 sizes: 𝙈 and 𝙎.

Try it and give your feedback!
⸻⸻⸻⸻⸻⸻⸻⸻
If you enjoy my work, please don't forget to leave a like!
⸻⸻⸻⸻⸻⸻⸻⸻
**MY 3D PRINTING SETTINGS** :

- 3D Printer: Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Cura 4.2.1
- Layer height: 0.2 mm (0.8 mm wall thickness; 3 top/bottom layers)
- Print time: 27min (M)/ 28 min (S)
- Infill : 20%
- No support needed
- Printing Temperature: 200°C / Build Plate Temperature: 60°C
- Print speed: 50 mm/sec / Outer Wall Speed: 25mm
- Filament: Silver Silk PLA+ by SUNLU
- Size: 37.8 x 21.8 x 19 mm (X,Y,Z) (M) / 35.7 x 21.2 x 18.9 mm (X,Y,Z) (S)

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Nose Clip Anti-Fog

𝘗𝘳𝘪𝘯𝘵 𝘪𝘵 𝘶𝘱𝘴𝘪𝘥𝘦 𝘥𝘰𝘸𝘯 𝘢𝘴 𝘴𝘩𝘰𝘸𝘦𝘥 𝘪𝘯 𝘵𝘩𝘦 𝘱𝘳𝘦𝘷𝘪𝘦𝘸.

𝘕𝘰 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘯𝘦𝘦𝘥𝘦𝘥.
𝘠𝘰𝘶 𝘮𝘪𝘨𝘩𝘵 𝘸𝘢𝘯𝘵 𝘵𝘰 𝘶𝘴𝘦 𝘢 𝘣𝘳𝘪𝘮 𝘵𝘰 𝘩𝘢𝘷𝘦 𝘢 𝘣𝘦𝘵𝘵𝘦𝘳 𝘢𝘥𝘩𝘦𝘴𝘪𝘰𝘯.

NoseClip_M.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘𝙖𝙡𝙞𝙗𝙧𝙖𝙩𝙞𝙤𝙣 𝙘𝙪𝙗𝙚 🎲

My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change.

This 20mm calibration cube has almost everything you need to check before actually start your prints: 𝙤𝙫𝙚𝙧𝙝𝙖𝙣𝙜𝙨, 𝙗𝙧𝙞𝙙𝙜𝙞𝙣𝙜, 𝙧𝙚𝙩𝙧𝙖𝙘𝙩𝙞𝙤𝙣, 𝙜𝙝𝙤𝙨𝙩𝙞𝙣𝙜, 𝙨𝙩𝙧𝙞𝙣𝙜𝙞𝙣𝙜, 𝙚𝙩𝙘.

You can enjoy making it and have an actual cool, original and good-looking cube!

Join the #𝙞𝙘𝙖𝙣𝙥𝙧𝙞𝙣𝙩𝙞𝙩 challenge , show up your printed cube!

Happy printing everyone! 🎲
⸻⸻⸻⸻⸻⸻⸻⸻
**_Please don't forget to leave a like if you enjoy my work!_**

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Calibration Cube_ICPI.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘𝙖𝙡𝙞𝙗𝙧𝙖𝙩𝙞𝙤𝙣 𝙘𝙪𝙗𝙚 🎲

My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change.

This 20mm calibration cube has almost everything you need to check before actually start your prints: overhangs, bridging, retraction, ghosting, stringing, etc.

You can enjoy making it and have an actual cool, original and good-looking cube!

Join the #𝙞𝙘𝙖𝙣𝙥𝙧𝙞𝙣𝙩𝙞𝙩 challenge , show up your printed cube!

Happy printing everyone! 🎲

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy, share your make and be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩 in your socials!

⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

I'm Luisa, an Italian girl with a strong passion for 3D Modeling who got introduced into the amazing world of 3D Printing always trying to bring you unique and original designs to print.

Hope you'll like my creations as much as I do 🥰

If you like what I do and would like to support me, please consider checking my links below.

Patreon : https://www.patreon.com/RandomizY

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like