Build video here: 
https://youtu.be/OHfEEHTd4sM

A sonic fidget spinner! Idea came from my son. Modeled in Fusion 360. Printed with PETG. Painted with acrylic. I used these 608 skateboard bearings: https://amzn.to/3ul0rg0 

I would test out the fit before you spend a bunch of time painting! Great thing about these files is if it's too big or too small, you can just scale up or down the model instead of having to edit the geometry.

Special thanks to facundogomez for the sprite: https://www.deviantart.com/facundogomez/art/Sonic-3-Sonic-Running-Fluids-Sprites-642180380

Sonic The Hedgehog Fidget Spinner

sonic_fidget_body_radbench.stl

These are fun because they are supposed to be bad. Anyone who's opened a SpongeBob popsicle knows that the placement of the eyes/mouth/teeth can be way off. So there's pretty much zero pressure while building these because the worse it looks, the better it is. Super fun project for the kids. We gave these to all of our relatives as Christmas tree ornaments and they were a big hit.

Build video here: https://youtu.be/rDdgNJad2T4

There's two versions: one with a loop holes for string, and one with no loop.

Printed with PLA on a Voxelab Aquila.

No Supports needed.

Intentionally Bad SpongeBob Popsicles

SpongeBody_wHanger.stl

The kids and I had this silly idea about having a toilet for our elf on the shelf. One week later and it now exists. For the benefit or the detriment of all mankind. You decide. And Happy Holidays.

Build video here: https://youtu.be/5fp03pKi-18

No supports needed. Printed on white Jayo PLA.

Elf on the Shelf Toilet Candy Dispenser

ElfToilet_BowlTank.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4857401.

Fits 1"x1" pegboard.
These are all 4 pegs wide.
I made sure the Tape measure tray fit the biggest one I have with a little bit of breathing room so it should be good for any size tape measure.
Thanks to [reeseallen](https://www.thingiverse.com/reeseallen) for the original peg files.

Contains:
Pencil Cup + Tray 
Pencil Cup + Tray Fill Lip
Pencil Cup Only
Pencil Cup Only Full Lip
Tape Measure Tray
Tape Measure Tray Full Lip
Shallow Tray

Pegboard Cups and Trays

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4950663.

Full build video here: https://www.youtube.com/watch?v=DjhcxoObey0

New castle and wall pieces for the board game Castle Panic. Replaces those cardboard pieces with a real 3D Castle! Includes fire pieces and the Wizard's Tower for "The Wizards Tower" Expansion and a Keep for the "Engines of War" Expansion.

The base is used to keep everything together. It passes the bump test. Tower and wall pieces slide into the pegs on the base. No need for glue or magnets.

Parts List:

Base
Barricade
Flame Token
Fortification Token
Keep
Tower A (w/Window)
Tower B (no Window)
Wizard's Tower
Wall A (w/Door)
Wall B (no Door)



Printing:

Fortification should be the only piece that will need supports. I tried to make sure supports were used as little as possible when modeling these files.

I used 10% infill on everything but if you're able to, I'd recommend higher infill on the lower parts of the towers so that they don't tip over so easily. The pegs pretty much solve this but either way, they work better with heavier lower sections. Should be easy print jobs.

Filament: 

[CC3D - Silver used for the castle.](https://smile.amazon.com/Silk-Silver-Filament-Printting-Materials/dp/B06XSBFB17)
Ziro - Brown Used for the barricades and Fortification
[Monoprice - High Gloss orange used for the Fire](https://smile.amazon.com/Monoprice-Hi-Gloss-Printer-Filament-1-75mm/dp/B07NQTZZTB)


Castle Panic Replacement Pieces

Tower_Wizards_v14.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5025401.

Not really movie accurate but it gets the job done! It's hollow to allow room for the pumpkin stem. Modelled in Maya and sliced in Cura.

Jack Skellington Pumpkin Santa Hat

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4859322.

This is a button mount that can be attached to the X-axis wheel plate of the Voxelab Aquila. I'm not sure if it will work on the Ender 3 V2, but it might since they're basically the same printer.

This will mount with the stock chassis bolts. Just unscrew the wheel plate bolt, and re-install with the mount.

I used Cura's timelapse plugin to move the print head to the button after each layer. The button triggered for me at 217.5mm but your set up may be different than this. I'd start at around 180 on the x axis and move it over in small increments until you find the right distance.

I used this [shutter cable](https://amazon.com/dp/B076DQKDPP?psc=1&ref=ppx_yo2_dt_b_product_details) to hook up to my Canon DSLR. Your camera might have a different connector.

Also used these [tactile buttons](https://smile.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_3?dchild=1&keywords=tactile+button&qid=1621073023&sr=8-3)

Here's a short video of it in action: https://imgur.com/gallery/d8k8ZoL
Here's the full install video: https://youtu.be/sV5vKwD4lFE



Voxelab Aquila Timelapse Button Mount for DSLR

Welcome | 3D printing | Electronics | [build vids](https://www.youtube.com/radbenchyt)
[Laser Cutting Files](https://cuttingpaths.com/maker/radbench/)
[LinkTree](https://linktr.ee/radbench)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

RadBench

Achievements

Seedling

Debutant