Modular Macaroni
70 downloads · 10 months ago · We made a pasta themed fidget and building toy!
I used this filament to print this model:[Caution Op
We made a pasta themed fidget and building toy! I used this filament to print this model:Caution Opaque Yellow
Print Settings Rafts: No Supports: No Resolution: .15-.2mm Infill: 10-15%
Gridfinity Baseplates
Gridfinity Divider Bins
8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate
6.25 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Offset Snap (DS Part A)
6.25 mm - Dual Offset Snaps (DS Part A)
Raised Dual Snap (DS Part B)
Raised Quad Snap (DS Part B)
Raised Double-Sided Snap (DS Part B)
9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Raised Multiboard Snap
Offset Snaps Removal Tool
.jpg&w=3840&q=75)
Multiboard Demo Pack (FREE)
8x8 Multiboard Corner Legacy Tile
Ironing Stack - Test Print - Key Chain
8x8 Multiboard Side Legacy Tile
%2520in%2520aciton%25202.png&w=3840&q=75)
Snap (DS Part B)
6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Cargo Containers - 1x1 (Mini Modular Storage)
