4 In A Row Lamp

We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin the lamp shade to play!

Print Settings -0.2mm layer height -15-20% infill -Supports needed for the base where the lamp will be seated -Print the base -I used this lamp cord: Lamp Cord -Print 21 red chips and 21 yellow chips -To print with optimal clarity: -.1mm layer height -2 perimeters -avoid crossing perimeters -100% infill -Aligned Rectilinear fill pattern -0 top and 0 bottom layers -Slow all speed to 20mm/s -Print at a higher temp for PLA, I used 220 for mine -Print on a smooth sheet or glass bed for best clarity -I used the “print by object” setting and filled the bed with copies for the transparent filament